View Full Version : Sight Adjustment
Went out and put 400 flawless rounds through the VBOB today. Only complaint is it shoots a little left.
Anyone know how to adjust the windage on this pistol? Do I need a sight tool?
They are Heine, it says Trijicon on side of rear sight?
RandallZ
01-15-2012, 10:02 AM
A sight pusher will make adjustment more accurate and easier, but you can use a hammer and punch to drift the sight if that's all you have.
Do you need to take the screw out of the sight, or just loosen it?
RandallZ
01-15-2012, 02:55 PM
Do you need to take the screw out of the sight, or just loosen it?
Just loosen it a bit. It doesn't go into the slide, just presses against the dovetail flat to keep the sight in place.
What sight tool works with the DW
Pawpaw
01-15-2012, 07:00 PM
What sight tool works with the DW
If my experience is any example, you may not need one.
I discovered the rear sight had come loose on my V-Bob. In fact, I was able to slip it all the way out the left side of the slide.
After I put it back in, it tightened right up with the allen screw.
RandallZ
01-16-2012, 09:53 AM
What sight tool works with the DW
I dunno...I do it old school style with a brass drift and hammer.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.