Spartan 300 Project

[Caleb]

http://i.imgur.com/YNoDS5M.jpg



Stay tuned............

[pitor]

Ok, tuned... For how long?

[Caleb]

Patience , young grasshopper.

[AFJuvat]

Can we get a hint?

Does it involve kicking 300 liberals into a pit while screaming "This is Sparta!"?

[Gatorade]

Does it involve kicking 300 liberals into a pit while screaming "This is Sparta!"?

IN!!!

[sdmc530]

Tick tock tick tock

[milkmanjoe]

You're the SOB that got me banned from FCC?

[Riverpigusmc]

You're the SOB that got me banned from FCC?

funny......No, Joseph, that was a Muslim Spartan. This is a Cockroach Cuban Spartan

[FfNJGTFO]

You're the SOB that got me banned from FCC?

If I may ask, who were you on FCC? PM if you prefer.

[Caleb]

You're the SOB that got me banned from FCC?

Lmao.... No but, if it makes you feel better.... I can try to get you banned from COTEP! funny

[Caleb]

funny......No, Joseph, that was a Muslim Spartan. This is a Cockroach Cuban Spartan

Like that Muslim Dbag has any chance of joining here!

[milkmanjoe]

funny......No, Joseph, that was a Muslim Spartan. This is a Cockroach Cuban Spartan

funnyfunnyfunny

If I may ask, who were you on FCC? PM if you prefer.

I was Ralph...RalphKramden........http://www.cotep.org/forum/picture.php?albumid=121&pictureid=1122
Notice the Last Activity date.....

Lmao.... No but, if it makes you feel better.... I can try to get you banned from COTEP! funny

:p funny

[Gatorade]

Doesn't say banned! Looks different than last time you were there.

[Sheepdog]

Like that Muslim Dbag has any chance of joining here!

We are all inclusive here. We do not discriminate. Look at all the different "Dbags" that are members here.:D

[milkmanjoe]

We are all inclusive here. We do not discriminate. Look at all the different "Dbags" that are members here.:D

I agree...some are sooooo obvious...... funny

http://www.cotep.org/forum/picture.php?albumid=121&pictureid=1123

[milkmanjoe]

Doesn't say banned! Looks different than last time you were there.

Yah...just never went back...no time to contribute...plus here is more fun, no swingin' schwanzes...don't dislike the people or the place, maybe one day I'll post something

[skosh69]

Where's the pew pew poodle shooter.

Lmao.... No but, if it makes you feel better.... I can try to get you banned from COTEP! funny

That'll be easy, include him in a group text and watch him go ballistic.

[Riverpigusmc]

funnyfunny

[milkmanjoe]

Where's the pew pew poodle shooter.



That'll be easy, include him in a group text and watch him go ballistic.


Bite me turd burglar...

[skosh69]

Bite me turd burglar...

See ^^^^

[milkmanjoe]

See ^^^^

http://www.cotep.org/forum/picture.php?albumid=121&pictureid=1124

[Riverpigusmc]

funny....I'll be closing this one before roach boy even gets around to posting what it was about in the first place

[Caleb]

Lmao..... I think this is more interesting than what I planned on posting!

[Caleb]

I am awaiting some parts to arrive.....just thought I would leak a teaser out there of some sort.

[milkmanjoe]

I am awaiting some parts to arrive.....just thought I would leak a teaser out there of some sort.

Good..... Back to regularly scheduled programming

[DrHenley]

"Tempest in a Teapot" funny

http://www.cotep.org/forum/picture.php?albumid=98&pictureid=1046

[NAMVET72]

funnyfunnyfunny



I was Ralph...RalphKramden........http://www.cotep.org/forum/picture.php?albumid=121&pictureid=1122
Notice the Last Activity date.....



:p funny


More like spoiled milkjoe, extinct member


Clyde

[Xbonz]

I'm working on a similar project. Except mine is 300 Trojans. Trying to finish by years end.

http://i.ebayimg.com/images/g/DosAAOSwDk5TxgFT/s-l300.jpg

[skosh69]

i'm working on a similar project. Except mine is 300 trojans. Trying to finish one box by years end, but my hand gets tired.


fify :D

[Lonestar grips.]

I'm working on a similar project. Except mine is 300 Trojans. Trying to finish by years end.

http://i.ebayimg.com/images/g/DosAAOSwDk5TxgFT/s-l300.jpg







planning a water balloon fight??:D

[Gatorade]

not to derail the water balloon fight but something along these lines?

http://i5.photobucket.com/albums/y196/Gator_b8/AR/17316A96-94DF-4581-B749-28577DFBC3F8_zpsm3tnjsw5.jpg

[Riverpigusmc]

funnyfunnyfunny

[Lonestar grips.]

is it going to be a select fire 300 blackout with a 26" heavy barrel, suppresser, 10x40 day/night scope, Sig arm brace, with racing stripes in hello kitty pink?

[Caleb]

is it going to be a select fire 300 blackout with a 26" heavy barrel, suppresser, 10x40 day/night scope, Sig arm brace, with racing stripes in hello kitty pink?

Damn Zane! Why can't you ever keep a freekin secret? !!!!! Last time I ever tell you anything top secret.

[Caleb]

not to derail the water balloon fight but something along these lines?

http://i5.photobucket.com/albums/y196/Gator_b8/AR/17316A96-94DF-4581-B749-28577DFBC3F8_zpsm3tnjsw5.jpg

You are on the right track.......

[Gatorade]

is it going to be a select fire 300 blackout with a 26" heavy barrel, suppresser, 10x40 day/night scope, Sig arm brace, with racing stripes in hello kitty pink?

I just got a woody.

[Lonestar grips.]

Damn Zane! Why can't you ever keep a freekin secret? !!!!! Last time I ever tell you anything top secret.


sorry bro.:(

[Caleb]

Project "Spartan 300" is my "Come and Take Them" CQB high caliber pistol. This thing will be good out to 300yds with plenty of object penetration up to 200yds and still be powerful enough to end the threat. I went with a pistol configuration because I wanted this to be shorter in length without paying a tax stamp and all the BS that goes with it. Maybe in the future I will SBR it but, I doubt it. It will sport a 10.5" barrel and a pistol stabilizing brace. I plan on running BUIS with a red dot of some sort. Anyways, here is a picture to keep you guys interested....lol

These are the parts that have arrived to date. Awaiting more in the mail.....Stay Tuned!!

AR 15 Pistol chambered in 300 blackout
--Anderson Stripped upper
--Anderson stripped lower
--PSA lower parts kit with enhanced trigger group
--Odin Works extended mag release
--Magpul MOE pistol grip
--"Milspec" Buffer spring
--PSA standard "Milspec" buffer
--KAK Ind. Pistol extension tube
--KAK Ind. Pistol stabilizer brace

http://i.imgur.com/PPPldJ8.jpg (http://imgur.com/PPPldJ8)

[Riverpigusmc]

looks like parts and pieces

[Caleb]

looks like parts and pieces

Soooooo observant!! nanner

[milkmanjoe]

Sounds like a great project....I have the .308 pistol and love it....need to copy you and put a brace on it....

[edgehill]

This is exactly the project I've wanted to do.

[pitor]

Nice project Caleb. Molon Labe

[Caleb]

Sounds like a great project....I have the .308 pistol and love it....need to copy you and put a brace on it....

The brace makes a world of difference, Joe

[Caleb]

This is exactly the project I've wanted to do.

Nice project Caleb. Molon Labe

Thanks, stay tuned for more hopefully this week.

[milkmanjoe]

The brace makes a world of difference, Joe

I bet....never shot one....never seen anybody with one I could try......hint hint

[Caleb]

I bet....never shot one....never seen anybody with one I could try......hint hint

I can make your dreams come true........wait, that doesn't sound right.

[milkmanjoe]

I can make your dreams come true........wait, that doesn't sound right.

:eek: ...... funny ..... Maybe next month we can install a brace on the PTR pistol

[Caleb]

:eek: ...... funny ..... Maybe next month we can install a brace on the PTR pistol

Let me know. nanner

[skosh69]

I can make your dreams come true........wait, that doesn't sound right.

Jumpin Jesus on a pogo stick. :facepalm2: The cooban is a flamer. :eek:

[Riverpigusmc]

Jumpin Jesus on a pogo stick. :facepalm2: The cooban is a flamer. :eek:

You just figured that out? Congrats, lightening

[NAMVET72]

Hey Caleb when you get it built let me know, I have some reloading data for you, because if you plan to buy ammo for it better go get a 2nd job, and 2nd life insurance policy 300 BO ammo isn't cheap..................


Clyde

[Caleb]

Jumpin Jesus on a pogo stick. :facepalm2: The cooban is a flamer. :eek:

You and Phil have nothing to say...... Liking each other's meats and all.

[Caleb]

Hey Caleb when you get it built let me know, I have some reloading data for you, because if you plan to buy ammo for it better go get a 2nd job, and 2nd life insurance policy 300 BO ammo isn't cheap..................


Clyde

Roger that, Chief

[milkmanjoe]

Jumpin Jesus on a pogo stick. :facepalm2: The cooban is a flamer. :eek:

He's cooban too? Ooiiiiyyyyyyy

[Caleb]

UPS left me a package today....hmmm I wonder what it could be?

[Gatorade]

Hey Caleb when you get it built let me know, I have some reloading data for you, because if you plan to buy ammo for it better go get a 2nd job, and 2nd life insurance policy 300 BO ammo isn't cheap..................


Clyde

Prices are getting better on factory but reloading is still where it's at. The biggest difference is the brass. Reforming .223 to 300 BLK is a steep learning curve to have any quantity of brass. I try to keep 2000 to a minimum of 1000 rounds of a caliber on hand but with BLK I only have about 300 rounds or so.

[Caleb]

Received some stuff today.

Midwest Industries 10.5" M-loc Free Float rail W/M-loc pict rail
Faxon 10.5" 1-8T in 300 Blackout w/Target crown
Faxon low Profile Gas Block
Spikes Tactical Pistol Length Gas Tube

http://i.imgur.com/kt2OyWl.jpg

Getting closer.... nanner

[NAMVET72]

Now cockroach tell us what you had to buy your better half to let her tell you it is okay to build another gun,


Clyde

[Caleb]

Now cockroach tell us what you had to buy your better half to let her tell you it is okay to build another gun,


Clyde

Shhhhh......it's a Black ops Mission.

[NAMVET72]

Shhhhh......it's a Black ops Mission.

No Problem, it will cost you in the long run funny funny funny,


Clyde

[Caleb]

Barrel has been installed and torqued to 45#s. It's ready for the gas block, gas tube, and handguards......next.

http://i.imgur.com/bbR6lfX.jpg

http://i.imgur.com/f6wypr9.jpg

nanner

[Caleb]

No Problem, it will cost you in the long run funny funny funny,


Clyde

Much easier to ask for forgiveness than permission. :D

[Gatorade]

Much easier to ask for forgiveness than permission. :D

That's why I order parts. If she sees parts come in she thinks it's just parts. She knows I have rifles but I don't think she really knows how many as most of the new ones have come in parts, parts is parts.

[Caleb]

That's why I order parts. If she sees parts come in she thinks it's just parts. She knows I have rifles but I don't think she really knows how many as most of the new ones have come in parts, parts is parts.

Lmao!!!! Same exact strategy.

[Arley]

Something wicked comes this way . Wicked wishes .

[Lonestar grips.]

is that an airsoft barrel? never seen an orange flash hider on a real gun.:D

[Gatorade]

is that an airsoft barrel? never seen an orange flash hider on a real gun.:D

I think it's just a thread protector. On my first BO I thought about running it with no muzzle device and it was pretty good. However the threaded steel being exposed made me nervous about corrosion and accidental damage so I put a break on it.

[Lonestar grips.]

I think it's just a thread protector. On my first BO I thought about running it with no muzzle device and it was pretty good. However the threaded steel being exposed made me nervous about corrosion and accidental damage so I put a break on it.


yeah I know what it is, was making a joke.

[Caleb]

I think it's just a thread protector. On my first BO I thought about running it with no muzzle device and it was pretty good. However the threaded steel being exposed made me nervous about corrosion and accidental damage so I put a break on it.

yeah I know what it is, was making a joke.

Actually you both are wrong. It's a new state of the art suppressor made to look like a thread protector. :p

[AFJuvat]

That's why I order parts. If she sees parts come in she thinks it's just parts. She knows I have rifles but I don't think she really knows how many as most of the new ones have come in parts, parts is parts.

Same strategy here.

That, 9r she pretends they multiply underbthe cover of darkness.

[Caleb]

Disclaimer: I actually received these parts AFTER I had the following post's update ...


Got some Strike Industries parts yesterday.....nanner


-Extended Charging Handle
-Forward Assist
-Extending Takedown Pins
-Dust Cover
-Enhanced Bolt Catch
-Ambi Safety 60/90 Degree

http://i.imgur.com/OiFbNJO.jpg

[Caleb]

So, today I decided to put some things together as much as possible as I wait for more parts.

The stripped receiver.....Anderson

http://i.imgur.com/NvhaUjl.jpg

Got the Extended Mag Release on.....seems to work nicely.

http://i.imgur.com/nQLIWB9.jpg?1

http://i.imgur.com/7RBKwr9.jpg

PSA polished trigger group

http://i.imgur.com/LStkHjA.jpg

Installed the trigger group and mocked up the safety till I receive the ambi one from Strike Industries..

http://i.imgur.com/NbY3lpL.jpg?1

http://i.imgur.com/wRVTE7i.jpg?1

KAK buffer tube and pistol brace installed

http://i.imgur.com/h7Zqh67.jpg?1

http://i.imgur.com/OE9U1AV.jpg?1

The MOE pistol grip is only mock installed...I'll wait till I install the Strike takedown pins and ambi safety before I fully install the grip.

That's it for now....stay tuned!!!!!

PS: Sorry for the crappy cellpics but, I don't feel like getting out the nice camera and going through all the steps to get the pics on here....thank you for understanding.

[NAMVET72]

By the time you get all the parts arrive ad you get it sighted in, it will be another new century, :eek::eek::eek::eek::eek::eek::eek::eek::eek:


Clyde

[Caleb]

This morning I finished the upper.....sort of. Still need a muzzle device.

I got the gas block and gas tube installed..

http://i.imgur.com/7nbOAa1.jpg

http://i.imgur.com/pq3Wqjq.jpg

Then the handguard went on.....

http://i.imgur.com/6Vs9EnV.jpg

http://i.imgur.com/NivXhNM.jpg

http://i.imgur.com/ngPKL14.jpg

http://i.imgur.com/WDOdLco.jpg

http://i.imgur.com/3xulv3z.jpg

http://i.imgur.com/M0Hq9Fy.jpg

http://i.imgur.com/NLvsvIS.jpg

http://i.imgur.com/KC3XYMo.jpg

Threw on the Strikes Industries dust cover.......

http://i.imgur.com/wltA9jz.jpg

http://i.imgur.com/t2YA0xC.jpg

http://i.imgur.com/efO6zVF.jpg

Then the Strikes Industries forward assist.......

http://i.imgur.com/7peuWPh.jpg

http://i.imgur.com/a3Z6GWS.jpg

http://i.imgur.com/H6xohEo.jpg

[Caleb]

By the time you get all the parts arrive ad you get it sighted in, it will be another new century, :eek::eek::eek::eek::eek::eek::eek::eek::eek:


Clyde

Patience grandpa! :mob:

[MPDC]

What? No BULLET BUTTON? Oh yeah, fellow GSS resident! :D

Going with an Aimpoint? nanner

[RKP]

Patience grandpa! :mob:

funny

[Caleb]

What? No BULLET BUTTON? Oh yeah, fellow GSS resident! :D

Going with an Aimpoint? nanner

WTF is a bullet button?!!! :rolleyes::D

I can't afford an Aimpoint, at least not now. I will pick a lower priced red dot for now. Not sure if I'm going with a Vortex Strikefire or a Holoson . We will see.

[skosh69]

WTF is a bullet button?!!! :rolleyes::D
.

Stupidest EBR accy known to man, thankfully only required here in Komifornistan.....:facepalm2:

[Caleb]

It's almost finished! All it needs is some BUIS and a doodad here or there but, technically it is ready for function testing and barrel break-in.

http://i.imgur.com/YKNNdmZ.jpg

http://i.imgur.com/opAQMMf.jpg

http://i.imgur.com/5QgNikb.jpg

http://i.imgur.com/sRH91oS.jpg

Some people like this muzzle brake with the blast shield on it, I'll give it a whirl and see how it handles. It's supposed to send all the noise and concussion forward away from the shooter. The mags are marked with a Spartan helmet for 300blk for safety reasons plus, I think it looks cool (and that's what really matters....duh!).

[RKP]

Yeah man .... looking good bud !! :cool:

[Riverpigusmc]

sweet

[AFJuvat]

Looks nice!

[NAMVET72]

Nice and now where is the range report with pics,


Clyde

[jmlutz]

Looking good!

[Caleb]

Thanks everyone. I won't be able to get a range report for at least three weeks. :( But, when I do I will definitely post up my results.

[Lonestar grips.]

looks awesome!

sucks you won't get to shoot it for three weeks! if you want, send it to me with a 1000 rounds of ammo and i'll test it for you and send you the results.nanner

[BeerHunter]

Project turned out nice! Looking forward to the range report. :D

[Caleb]

Update: Changed out the Kak Industries stabilizer in lieu of the new Sig Brace. A 10 times better upgrade imho.

Still have not shot this little guy though, lol. https://uploads.tapatalk-cdn.com/20170708/f7243351daa473b5412600b401a0f688.jpghttps://uploads.tapatalk-cdn.com/20170708/5f2e7226f62332a84999233dde59ede8.jpg


Sent from my iPhone using Tapatalk

[pitor]

Sweet, where's the range report???

[Gatorade]

New Sig Brace? I didn't know there was a new one!


Looks awesome! Get it to the range already! You got ammo?

[Caleb]

Sweet, where's the range report???

Uhmmm...... it's still a virgin, kinda like Ell was till he met Mayla.

New Sig Brace? I didn't know there was a new one!


Looks awesome! Get it to the range already! You got ammo?

Yep, I hated the look and bulkness of the original one. So, that's why I went with the KaK. But, with this newer version it's so much more comfortable and better looking than the original one.

I have ammo, just never took it out. I will have to do that soon. Maybe on the 14th if we hit the range afterwards. Just maybe, lol.