S&w 686-1

[Caleb]

I just picked up my neighbor's 357 mag yesterday. He is an 80+ year old German pro-gun, pro-liberty guy that just can't enjoy the power of the 357 or even the 38 spl. So, he asked me if I could find him a buyer for his Smith. I said ... "Yes! I'll buy it!" Lol...

Anyways, it's an earlier model (dash -1) without the stupid side lock. It's in excellent condition and doesn't look to be shot much (the cylinder lock mark on the cylinder is very light). Has a 6" full underlug barrel with target sites. The trigger is typical Smith revolver smooth and just the right lbs.

Here are a couple of preliminary pics and I will update when I do a range report.

https://uploads.tapatalk-cdn.com/20170528/f81602ef0b2d5b6ddd842755c4b8d846.jpghttps://uploads.tapatalk-cdn.com/20170528/3a87d259b959fbbc1d09ef6e8d210497.jpghttps://uploads.tapatalk-cdn.com/20170528/af36d12403950a12868e1db0bc95277a.jpg


Sent from my iPhone using Tapatalk

[RKP]

Great find bud, congrats ! http://www.cotep.org/forum/images/icons/icon14.gif

[Riverpigusmc]

nice.

[sdmc530]

yep, very nice bud!!

[Lonestar grips.]

very nice!!

[pitor]

Very nice Caleb and that's what a good man does to help neighbors in need, buy their firearms, LOL! Great score roach boy.

[NAMVET72]

Very Nice Caleb now get some custom grips for it,


Clyde

[sdmc530]

Very Nice Caleb now get some custom grips for it,


Clyde

I know a guy

[Caleb]

I know a guy

That guy doesn't do Smith grips. :(

[LittleGator]

Nice piece. Congrats!

[Rick McC.]

Very nice revolver, Sir!

[AFJuvat]

Congrats!

Nice score!

[sdmc530]

That guy doesn't do Smith grips. :(

I bet he can though!!! You should try to talk him into it. Does amazing work.

[skosh69]

A beauty!!

[Xbonz]

Nice cannon. Enjoy.


http://www.ahrendsgripsusa.com/retro.htm

[Lonestar grips.]

That guy doesn't do Smith grips. :(


well...........that's not quite true anymore. let's just say advancements in redneck science have been made.:D


I still don't have a K/L frame Smith but I may be looking for one in the near future.

[sdmc530]

well...........that's not quite true anymore. let's just say advancements in redneck science have been made.:D


I still don't have a K/L frame Smith but I may be looking for one in the near future.

I knew it!!!! There is nothing Zane cant do.

[Caleb]

well...........that's not quite true anymore. let's just say advancements in redneck science have been made.:D


I still don't have a K/L frame Smith but I may be looking for one in the near future.

I knew it!!!! There is nothing Zane cant do.


Woohoo!!! This is great news!

[edgehill]

Very nice

[Caleb]

Thanks everyone!

[Razorwire]

Caleb, take a look on the crane to see if this beautiful 686 has received the "M" stamp. The hammer nose bushing is to be replaced, and if the work has been done, the "M" will be stamped on the crane.


One other thing to look at: Mine left the factory without the Forcing Cone being cut. I had the tools and did the work myself. It sure put lots of little holes in my arms prior to finding out it wasn't done :(

[Caleb]

Caleb, take a look on the crane to see if this beautiful 686 has received the "M" stamp. The hammer nose bushing is to be replaced, and if the work has been done, the "M" will be stamped on the crane.


One other thing to look at: Mine left the factory without the Forcing Cone being cut. I had the tools and did the work myself. It sure put lots of little holes in my arms prior to finding out it wasn't done :(

Thanks , I will check it out when I get home tonight. Is it something that "has" to be done? I would hate to send it in to Smith and wait a thousand years to get it back.

[Razorwire]

Gunsmith can do the hammernose bushing. Our department armorer did all of our department 686s, and he did my personal one as well.

[Caleb]

Sounds good.

I got in too late last night to look, will try today.

[Caleb]

Caleb, take a look on the crane to see if this beautiful 686 has received the "M" stamp. The hammer nose bushing is to be replaced, and if the work has been done, the "M" will be stamped on the crane.


One other thing to look at: Mine left the factory without the Forcing Cone being cut. I had the tools and did the work myself. It sure put lots of little holes in my arms prior to finding out it wasn't done :(

Ok so I looked. "M686-1" is on the crane. Does this mean it's been repaired?

[Razorwire]

I would assume so. Our armorer stamped them as S&W had specified that it had to be on the crane. Prior to that, there was no "M" anywhere.

[Caleb]

Hmmm.... I didn't see any other "M" besides that one.


Sent from my iPhone using Tapatalk

[Razorwire]

http://firearmsid.com/Recalls/FA_Recalls%205.htm

I really think you're good to go. Above is the link to the S&W recall information. Hope this helps.

[Caleb]

I believe so too. It states in that link that the "M" should be stamped "above" the model number in the crane. Mine is stamped in front of the model number but, since these do not come with a letter before the model number.....I believe mine was retrofited with the new part.

[GD2A]

Awesome! I love old S&W wheel guns. Enjoy!

[Caleb]

Threw on some new Altamont target grips, changes the look for the better.

Before.....https://uploads.tapatalk-cdn.com/20170610/daf30ccfdb2de1e10fcd743ec2d92fed.jpg

After.......https://uploads.tapatalk-cdn.com/20170610/3f6711453568125c1a22471b8d4a2de0.jpg


Sent from my iPhone using Tapatalk

[Riverpigusmc]

Sweet

[RKP]

Threw on some new Altamont target grips, changes the look for the better.

Yes it does ... very nice.

[Caleb]

686 doing some work. https://uploads.tapatalk-cdn.com/20180203/88c6dc92102dacb5c007e414c2e9755e.jpghttps://uploads.tapatalk-cdn.com/20180203/95f1af495f94f7aad4f140d6e6edf2e8.jpghttps://uploads.tapatalk-cdn.com/20180203/4ebff435dcf4967bfc4f98eacb91fc6b.jpghttps://uploads.tapatalk-cdn.com/20180203/0f9dfcd0def03c0452af873f1c95e0bb.jpg


Sent from my iPhone using Tapatalk

[NAMVET72]

Better call the FD Caleb is playing with Fire again.................:D



Clyde

[Caleb]

Better call the FD Caleb is playing with Fire again.................:D







Clyde



Hey now! I’m not Mike, I don’t set forests on fire. [emoji12]


Sent from my iPhone using Tapatalk

[RKP]

Pretty cool pics bud !! :cool:

[sdmc530]

Pretty cool pics bud !! :cool:

Very cool

[AFJuvat]

Nice score!

[Caleb]

Thanks all!


Sent from my iPhone using Tapatalk