PDA

View Full Version : Rebuilt my bench today

Boats
10-14-2012, 10:17 PM
I spent the afternoon ripping out the cheapo shelves I had on my bench top and installing some much nicer shelves on the wall.

It's amazing what a large, bright, clean bench top can do for both your productivity and your mood.

Then I installed Lee's mounting plate and some adapters for my presses.

Then I put together a new Uniflow powder measure and a large micrometer attachment for it. My plan is to use a Lee Breechlock Challenger press with a Uniflow adapter on it to load all my rifle bullets in batch mode from now on. I'll let you know how it goes when I get back to rifle reloading in a while.

Then I loaded up 200 rounds of .45 230gr JHP and 200 rounds of 9mm 124gr JHP.

Now to shoot some of that stuff!
Deleted
10-14-2012, 11:05 PM
RULE # 1 Pictures or it didn't happen !!!!!!
skosh69
10-15-2012, 12:14 AM
RULE # 1 Pictures or it didn't happen !!!!!!

Yup!

http://i1122.photobucket.com/albums/l538/skosh1/gunney.jpg
DaFadda
10-15-2012, 06:31 AM
8 hours later and there's no PICTURES???

:drum:scold
Boats
10-15-2012, 07:31 AM
Patience, Grasshoppers!

http://basicsofthestockmarket.com/wp-content/uploads/2012/03/grasshopper-stock-market-basics.jpg

In the Zen of reloading, I was too busy doing to spend time documenting.

Pictures forthcoming... today.

Sheesh!

Tom
Boats
10-15-2012, 08:08 AM
8 hours later and there's no PICTURES???

:drum:scold

Ok, ok... Here is a pic. Only had a minute and should have taken many more to bore you with, but we'll have to be happy with this for the moment.

http://i1294.photobucket.com/albums/b606/pitlog/DSC03137_zps97bf4460.jpg

That's a Lee Classic Turret press on the right, my main press for pistol rounds. I can do a couple hundred rounds an hour when I get going with it. I happened to be reloading 9mm last night. I have another turret ring with its own powder measure set up for .45. Usually the only tweaks I need to do when switching are fiddle with seating depth if I've changed from one .45 bullet to another, and verify or modify the powder volume.

You can't see it in this pic, but there are three shelves. The top one has my other presses and a couple of other things that I don't need to have to hand all the time.

Tonight I will try to set up the Breechlock Challenger press with the Uniflow powder measure. I have high hopes for this combo. Hand measuring powder for .308 rounds takes too much time. I'm hoping the Uniflow can handle relatively large amounts of powder.

If I get that done, I'll take another couple pics.

Anybody using a Uniflow with Lee equipment? I bought an aluminum adapter that screws in to the bottom of the Uniflow and press fits with into the powder through die on the Lee. It was just a couple bucks on Ebay and looks like it will speed things up in a big way.

BTW, the bench shares a corner in my woodworking shop, so while I have lots of tools around, I really don't have all that much room. I have big tools!
Roverron
10-15-2012, 08:12 AM
Nice Bench!
titanse05
10-15-2012, 03:47 PM
Much better!
Snipersnest
10-15-2012, 06:15 PM
Nice! I should get back into the reloading scene.
Boats
10-15-2012, 06:41 PM
Nice! I should get back into the reloading scene.

If you shoot a lot, it sure is cheaper. And I find it relaxing. Gets me away from the noise.

Others, of course, find it boring.

YMMV

Tom
sdmc530
10-15-2012, 06:55 PM
Nice! I should get back into the reloading scene.

Just don't take lessons from Ell funny
NAMVET72
01-25-2013, 07:55 PM
Just don't take lessons from Ell funny

+ 100 to what Phil Posted.

Pretty Nice Bench Tom,



Clyde
deputybpfife
01-25-2013, 09:28 PM
Looks nice, Boats!
Boats
01-25-2013, 09:36 PM
It's changed a lot since then, Barney (can I call you Barney? :))!

I'll have to take another picture to post. Maybe this weekend.

Boats
Snipersnest
01-26-2013, 07:14 PM
My SIL, got a Dillon 650 for Christmas, I got him a set of .308 dies and he got .45 ACP dies. He just got a .50 cal. press and a shotshell loader. I'm gonna have to get out to the police range and pick up all the once fired brass. I gave him some components and manuals I still had laying around. A mutual friend gave him a nice heavy duty bench and I'll help him set things up..........after all, he gonna be making me some bullets.:D
deputybpfife
01-26-2013, 09:10 PM
It's changed a lot since then, Barney (can I call you Barney? :))!

I'll have to take another picture to post. Maybe this weekend.

Boats

Yes, you can call me Barney...name's actually Anthony, but I really like Barney. Lookin' forward to the new pics.
sdmc530
01-26-2013, 11:05 PM
Yes, you can call me Barney...name's actually Anthony, but I really like Barney. Lookin' forward to the new pics.

I love ol barn great show I hope u got more than one bullet though.
Deleted
01-26-2013, 11:57 PM
I love ol barn great show I hope u got more than one bullet though.


Not from Ellison though.funnyfunnyfunny

Nice Bench Tom!
deputybpfife
01-27-2013, 12:02 AM
I love ol barn great show I hope u got more than one bullet though.

I got seven in the magazine and one in the chamber, but I'm going to have to reload. Andy won't give me any more! :(
sdmc530
01-27-2013, 01:04 PM
I got seven in the magazine and one in the chamber, but I'm going to have to reload. Any won't give me any more! :(

funny, it ony takes one I guess, maybe Sheriff Taylor was on to somthing!