AR trigger fix This works
 

Just did this and it worked very well . It is not the screw to take up the trigger play that keeps your trigger set to fire .

I have about 4 lb. pull now . I had already polished out the trigger and shear prior to doing this .

http://www.sargenthome.com/15_Minute_AR_Trigger_Job.htm

Good refresher for the newbies.

First did this over 10 years ago. Now I just use the JP springs.

I used JP on my other AR but at $20.00n I thought I would give this a try . Saved a couple of bucks . That's always good for my Wife .

Good DIY, thanks for posting.