Quote:
Originally Posted by pitor
Thank you for the detailed info Gary. Much appreciated
|
What the Apex trigger gives you is a new sear, springs for the trigger (1 will give you a 5# trigger, one for 4# pull and if you leave the factor trigger spring in you can go 3#'s or less (around 28#'s)
you also get a forward set sear and you ca get a kit with a Flat face Trigger ( I use them and they are great).
They have very little to no over travel pr under travel.
you can then add a competition striker spring kit and adjust the striker hit ( I use Federal Primers in my loads).
The last thing to do is add a full length SS Guide rod (4.25") and a 13# ( or so) ISMI recoil spring.
And then test,test test
