The FCD does not have a seater plug, so you will have to seat with a regular seating die first.
I set my seating die so that it just takes down the bell, but does not crimp, then run it through the FCD to crimp and post-size.
I actually "Neck-Size" my pistol brass, sizing only the portion that the bullet will be seated in. The post-sizing ring on the FCD takes care of the rest of the case.
__________________
Jim
CBOB0497
"That rifle hanging on the wall of the working class flat or laborer's cottage is the symbol of democracy. It is our job to see that it stays there."
- George Orwell
|