Heinie sight set...............
Wilson gold bead front sight...
EGW bushing....................
EGW slide stop.................
Wilson Extractor...............
EGW Ejector....................
EGW thumb safety...............
EGW grip safety................
EGW guide rod..................
Wilson hammer..................
EGW sear.......................
EGW disconnector...............
STI firing Pin.................
EGW firing pin stop............
Stan Chen mainspring housing...
10-8 magazine catch............
Greider trigger................
Wolff sear spring..............
Wolff recoil spring............
EGW grip screws................
Here is a list of the work done.
High cut frontstrap, hand checker 25 lpi, bordered
Machine frame for Chen mainspring housing,
blend, round heel, checker 25 lpi.
Machine & hand bevel mag well
Cut frame, fit & blend grip safety, convert to series
80
Fit, re shape & blend thumb safety
Fit & blend oversized slide stop, shorten &round,
recess & chamfer frame hole
Fit magazine release, blend
Fit trigger
Fit oversized firing pin stop
Machine slide for front and rear sights
Fit & tune extractor
Fit oversized bbl bushing on lathe & blend
Machine slide- live round eject, flare ejection port
True & polish breech face
Fit, cut, tune ejector & blend
30 degree recessed & polished flush crown
Serrate rear of slide 40 lpi
Machine feed ramp 31.5 degrees & hand polish
Re cut bbl throat & polish
Smooth & fit all fire control parts. Trigger job 4.5
lbs
De burr/ de horn gun and all parts
Satin bead blast, hand polish slide flats 400 grit
Test fire- silver tip, hydra shok, & norma. All ok
__________________
COTEP CBOB #289
"Deserve's got nothing to do with it".
|