Quote:
Originally Posted by pitor
After doing some very quick research, I was watching videos of the Lee turret press that has Auto indexing. It seems like a very nice beginner set-up, the kit comes with a lot of goodies necessary to reload, and only a set of appropriate dies will be needed to get started. About 250 rds per hour once familiar with it. Of course I need a tumbler and other tools are not part of the press kit but that's fine. What you all think?
|
That sounds good really. 250 per hour is good. Does that including checking powder on every 50-100 rounds?
Just for comparison:
On my 650 I can do about 500-600 rounds an hour with all the refilling stuff in the middle (primers, powder). I check powder ever 100 rounds. I used to check more often but the Dillon dispenser is super good and I don't load to max on the 45 so I have wiggle room. I have never had an issue with the powder getting out of whack on my loads.
On the 10mm I check every 50 because I make them hotter. But I only load about 20% as much at my 45.