Tools List for Rodgers Pistol Class

[Lane]

A couple of folks asked that I share the list of tools Bob asked that we bring to class (did I mention that I'm counting the days??) Here's what he sent me:

• Dial Caliper
• Dremel Tool
• Blue Sharpie Marking Pen
• Thin Cotton Longsleeve Shirt
• Thin cotton gloves
• Masking tape
• Safety Glasses
• Shop Towels
• Cleaning Supplies
• Shooting supplies

From Brownells (or Midway, Enco, MSC Industrial)

• Magnifier #345-534-002
• File cleaner 537-020-002
• Carbide cutter #257-990-300
• Carbide Cutter #257-990-500
• Sanding Drums #257-400-408 and #257-400-432
• 1/2" Sanding Drum Mandrel
• Sanding roll no taper #591-801-240
• Sanding roll tapered #591-510-240
• Sanding roll mandrels #591-812-001
• Cratex Mandrels #190-001-004
• Economy needle file set #345-475-000
• Needle file handles #249-210-300
• Nicholson 8" mill bastard file
• Ceramic Stone Set #080-721-621
• Brown Sear Jig #087-000-011
• Round File for barrel lugs #360-313-231
• MX Wheels #084-000-025
• Dremel Adjustable Chuck
• Hollow handle Screwdriver #080-087-040
• 1911 Bushing Driver bit #080-434-045
• 1" Nylon/Brass Hammer #818-600-100
• Bushing Wrench #080-045-045
• Mainspring Housing Tool #080-850-000
• Punches #827-525-780 -790 -800 -810
• Bench Block #100-004-369
• Medium cut pillar file #191-398-730
• Cloth roll for final finishing parts #657-110-320
• The Colt .45 Automatic Shop Manual #924-200-045

Estimated cost is $400 - depending on which files you go with.

Lane

[Mike45]

Wow that is a lot of stuff.

Do you have some of this stuff or are you going to have to buy a lot of it Lane?

I would love it (I am sure other would also) if you made this thread or a different thread a diary of your adventure building up to and through your Rodgers Pistol Class.

Thanks for sharing Lane.

[Lane]

Originally Posted by Mike45

Wow that is a lot of stuff.

Do you have some of this stuff or are you going to have to buy a lot of it Lane?

I would love it (I am sure other would also) if you made this thread or a different thread a diary of your adventure building up to and through your Rodgers Pistol Class.

Thanks for sharing Lane.

I have some things, and some of the stuff can be found at Home Depot or other places less expensive than Brownells. I plan on documenting my journey of enlightenment, I'll share if anyone is interested.

The tool list came with a running commentary - I'll post it when I have a few minutes. Bob seems to have a pretty good sense of humor.

Lane

[AutoMag]

I am sure that you will have a great time at the class Lane!!!

Thanks for listing the tools needed.

[jmlutz]

I wish you all the best, you'll do fine with the classes Mike

[cttbax]

I am sooooo jealous! I want to take this class! It is on my bucket list!!!!!

[GoldenVolt]

Originally Posted by NormanXDm

A couple of folks asked that I share the list of tools Bob asked that we bring to class (did I mention that I'm counting the days??) Here's what he sent me:

• Dial Caliper
• Dremel Tool
• Blue Sharpie Marking Pen
• Thin Cotton Longsleeve Shirt
• Thin cotton gloves
• Masking tape
• Safety Glasses
• Shop Towels
• Cleaning Supplies
• Shooting supplies

From Brownells (or Midway, Enco, MSC Industrial)

• Magnifier #345-534-002............................................... .$14.80
• File cleaner 537-020-002............................................... $12.99
• Carbide cutter #257-990-300.........................................$12.99
• Carbide Cutter #257-990-500.........................................$12.99
• Sanding Drums #257-400-408 and #257-400-432................$6.50
• 1/2" Sanding Drum Mandrel........................................... ...$4.99
• Sanding roll no taper #591-801-240..................................$4.99
• Sanding roll tapered #591-510-240...................................$6.99
• Sanding roll mandrels #591-812-001..................................$4.99
• Cratex Mandrels #190-001-004.......................................$12.99
• Economy needle file set #345-475-000.............................$26.46
• Needle file handles #249-210-300.....................................$8.99
• Nicholson 8" mill bastard file.............................................$ 9.99
• Ceramic Stone Set #080-721-621...................................$49.99
• Brown Sear Jig #087-000-011.........................................$39.85
• Round File for barrel lugs #360-313-231............................$24.99
• MX Wheels #084-000-025..............................................$ 18.99
• Dremel Adjustable Chuck
• Hollow handle Screwdriver #080-087-040
• 1911 Bushing Driver bit #080-434-045..............................$12.99
• 1" Nylon/Brass Hammer #818-600-100..............................$19.99
• Bushing Wrench #080-045-045
• Mainspring Housing Tool #080-850-000.............................$24.99
• Punches #827-525-780 -790 -800 -810............................$19.96
• Bench Block #100-004-369.............................................$4 9.99
• Medium cut pillar file #191-398-730..................................$14.99
• Cloth roll for final finishing parts #657-110-320.....................$9.99
• The Colt .45 Automatic Shop Manual #924-200-045

Estimated cost is $400 - depending on which files you go with.

Lane

Lane, I'm very happy for you. You are a lucky man.
Hope you don't mind I added some prices from Brownells.

Check out http://www.mcmaster.com/ Good quality products.

Greg