COTEP.org  

Go Back   COTEP.org > Main Category > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 08-30-2014, 04:52 PM
Dave Waits's Avatar
Dave Waits Dave Waits is offline
Founding COTEP Member who is watching over us from above with God at a giant shooting range in heaven
COTEP Member
 
Join Date: Apr 2011
Location: Loveland, Ohio
Posts: 928
Thanks: 4
Thanked 229 Times in 59 Posts
Default PB&J, Buttered bread and other things

You ever notice how some loads just work no matter what gun you use? It's like God looked and said, "Well, I'll make this work for them." Every caliber I've ever loaded had one universal sweet load that performed well no matter what. Let's look at some.

357 Magnum-Now, I'm sure everybody has a 'pet-load' for the 357 but, I'm talking about universal truths here. My vote goes for 13.5 grains of 2400 with any 158. I've owned probably 24 or 25 357s during my life and,except for a Snubbie, all have shot excellent groups with this load. Slightly warmer than factory(Most 6" guns I've had would do 1325-1350fps with this), this round works for anything( I've killed a couple deer with it myself).

38Special- I know this looks backward but, it's my thread. In the 38, unless you're loading for defense you can't beat 4.2 grains of Unique and a 158SWC. This has to be one of the most accurate loads I've ever seen in any caliber. I've had S&W shoot this load into a single, ragged hole at 25 yards with monotonous regularity. It's a mild load that gives beginners a big boost due to it's excellent accuracy.

45ACP- In this caliber my choice is 5.2 grains of WW231/HP-38 with a 230RN, either lead or jacketed at an OAL of 1.265. I have yet to see a 1911 that this round would not only feed well, but be fairly accurate in. It gives Factory-equivalent velocity, around 825fps at ten feet) and will stay within 2-1/2" at 25 yards if you do your part. Just an all-around good load.

44Magnum- Yes, I was scared by a picture of Elmer Keith at an early age. I love big-bores and the 44 in particular. My nominee for this caliber is Elmers' load, which I've used for many years to great effect. 19.5 grains of 2400 and a 240-250gr. hardcast SWC. Very accurate and capable of taking Deer at 100 yards and slightly beyond. Recoil, while there, isn't objectionable. I've used this load, among others, in about six different 44Magnums, all shot it equally well.


Rifles- other than Garands, I really don't have much in the way of load-knowledge and Garands are a different animal. With a 150, I like 47.5 grains of IMR-4895. With a 168 SMK I like 46.5 grains and with a 175 SMK I run 46 grains even. These loads have served me well at Matches(Both Service-Rifle and High-Power) for over 30 years.

I'm sure a bunch as opinionated as this group will have different loads and I look forward to reading about them. I'm always ready to try something new.
__________________
Diligentia, Vis, Celeritas
COTEP#CBOB0428
NRA,GCA,OGCA, USAF,Msgt.(Ret.)
Reply With Quote
The Following 6 Users Say Thank You to Dave Waits For This Useful Post:
Caleb (08-30-2014), DaFadda (04-05-2015), MajO (08-30-2014), Riverpigusmc (08-30-2014), ronpaul50 (08-30-2014), sdmc530 (08-30-2014)
  #2  
Old 08-30-2014, 05:28 PM
Riverpigusmc's Avatar
Riverpigusmc Riverpigusmc is offline
Founding Member
Super Moderator
 
Join Date: Aug 2011
Location: Archer, Florida CSA
Posts: 12,965
Blog Entries: 5
Thanks: 1,961
Thanked 3,478 Times in 715 Posts
Default

Thanks, Yoda. With some of the newbie loaders (myself included) this needs stuck
__________________
NRA Life Member
Wilson Combat CQB
Kimber Tactical Pro II
S&W J-Frame .38
ect
" I don't own the clothes I'm wearin', and the road goes on forever "

There's a gator in the bushes, and it's calling my name...
COTEP #523
Reply With Quote
  #3  
Old 08-30-2014, 06:09 PM
AutoMag's Avatar
AutoMag AutoMag is offline
Founding Member
COTEP Member
 
Join Date: Apr 2011
Posts: 4,697
Thanks: 154
Thanked 263 Times in 74 Posts
Default

Did someone mention peanut butter and jelly!!!!! (well in my sandwich it is always jam!!)



Just kidding around......great post Dave.

I hope that all is going well for you and Paige my friend!!!
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!!


COTEP # CBOB0152
Reply With Quote
  #4  
Old 08-30-2014, 06:19 PM
DrHenley's Avatar
DrHenley DrHenley is offline
Founding Member
COTEP Member
 
Join Date: Jun 2011
Location: Columbus, GA
Posts: 3,600
Thanks: 68
Thanked 805 Times in 214 Posts
Default

I also found the 5.2 grains HP-38 with 230 grain hardball to be a sweet spot load for all 1911s I own. In fact, I'm about to load up a batch in a little while.

Some universal rifle sweet spot loads:

45-70 - 51.5 grains IMR 3031 with 300 grain Rem JHP (safe for all 45-70s, kills deer like the Hammer of Thor)

30-06 - 59 grains IMR 4350 with ANY 150 grain bullet. (NOT a Garand load)

22 Hornet - 11.2 grains IMR 4227 with 35 grain VMax.
__________________
Jim
CBOB0497

"That rifle hanging on the wall of the working class flat or laborer's cottage is the symbol of democracy. It is our job to see that it stays there."
- George Orwell
Reply With Quote
  #5  
Old 08-30-2014, 11:05 PM
Riverpigusmc's Avatar
Riverpigusmc Riverpigusmc is offline
Founding Member
Super Moderator
 
Join Date: Aug 2011
Location: Archer, Florida CSA
Posts: 12,965
Blog Entries: 5
Thanks: 1,961
Thanked 3,478 Times in 715 Posts
Default

I also use 5.1 gr W231 (identical to HP-38) under a 230 grain LRN.

New reloaders...start at low end of published data and work up to these loads, and take notes
__________________
NRA Life Member
Wilson Combat CQB
Kimber Tactical Pro II
S&W J-Frame .38
ect
" I don't own the clothes I'm wearin', and the road goes on forever "

There's a gator in the bushes, and it's calling my name...
COTEP #523
Reply With Quote
  #6  
Old 09-02-2014, 01:10 PM
milkmanjoe's Avatar
milkmanjoe milkmanjoe is offline
COTEP Member
 
Join Date: Sep 2013
Location: Fl or SC, wherever my wife banishes me to
Posts: 4,227
Thanks: 736
Thanked 383 Times in 88 Posts
Default

Quote:
Originally Posted by Riverpigusmc View Post
I also use 5.1 gr W231 (identical to HP-38) under a 230 grain LRN.

New reloaders...start at low end of published data and work up to these loads, and take notes
I have yet to start reloading full time. Since we are in the grasp of a possible move I am not setting up for reloading. Once I know, which should be by January 1, if we are moving, I will hatch a plan.

I am, however, buying supplies, and if I come across good deals I will buy alot(W231) and pass the supplies to COTEP members at exact cost. I'll pay the shipping since I missed so many birthdays here. Let's just hope I can make that one score that is trying to peek over the horizon!
__________________
CBOB0716

"The most basic right that we have emanates from our Creator and it is that unalienable right to life. We stand firmly on the principle that from conception until the last breath is drawn, life is sacred.”

Political Correctness is a doctrine, recently fostered by a delusional, illogical minority and promoted by a sick mainstream media, which holds forth the proposition that it is entirely possible to pick up a piece of shit by the clean end!
Reply With Quote
  #7  
Old 09-02-2014, 01:27 PM
GD2A's Avatar
GD2A GD2A is offline
COTEP Member
 
Join Date: Jan 2014
Location: Miami, FL
Posts: 1,589
Thanks: 163
Thanked 200 Times in 34 Posts
Default

Awesome Coke set, John!
__________________
COTEP 730
Reply With Quote
Reply




All times are GMT -4. The time now is 09:24 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.