AR trigger fix This works

Arley · #1 08-21-2016, 08:02 PM

Just did this and it worked very well . It is not the screw to take up the trigger play that keeps your trigger set to fire .

I have about 4 lb. pull now . I had already polished out the trigger and shear prior to doing this .

http://www.sargenthome.com/15_Minute_AR_Trigger_Job.htm

wxl · #2 08-22-2016, 07:59 AM

Good refresher for the newbies.

First did this over 10 years ago. Now I just use the JP springs.

Arley · #3 08-22-2016, 10:05 AM

I used JP on my other AR but at $20.00n I thought I would give this a try . Saved a couple of bucks . That's always good for my Wife .

Caleb · #4 08-22-2016, 01:24 PM

Good DIY, thanks for posting.

The Following 4 Users Say Thank You to Arley For This Useful Post:
Caleb (08-22-2016), RKP (08-21-2016), skosh69 (08-21-2016), TLE2 (08-22-2016)