Sight Adjustment
 

Went out and put 400 flawless rounds through the VBOB today. Only complaint is it shoots a little left.

Anyone know how to adjust the windage on this pistol? Do I need a sight tool?

They are Heine, it says Trijicon on side of rear sight?

A sight pusher will make adjustment more accurate and easier, but you can use a hammer and punch to drift the sight if that's all you have.

Do you need to take the screw out of the sight, or just loosen it?

Just loosen it a bit. It doesn't go into the slide, just presses against the dovetail flat to keep the sight in place.

What sight tool works with the DW

If my experience is any example, you may not need one.

I discovered the rear sight had come loose on my V-Bob. In fact, I was able to slip it all the way out the left side of the slide.

After I put it back in, it tightened right up with the allen screw.

I dunno...I do it old school style with a brass drift and hammer.