COTEP.org

COTEP.org (https://www.cotep.org/forum/index.php)
-   Reloading Bench (https://www.cotep.org/forum/forumdisplay.php?f=26)
-   -   Share your 10mm loads here please (https://www.cotep.org/forum/showthread.php?t=238)

douglas_knott 05-03-2011 10:29 AM

Share your 10mm loads here please
 
One that I use is
180gr XTP and Golddots
10.5gr of Bluedot
WLP primer
OAL- 1.25"
this has been a good round for my G20

i have a few lead i would like to try out. just curious if anyone has loaded with them and what they found to be good loads.
this is what i have.
180gr flat point from missouri cast bullets
170gr swc idp #2 from missouri bullet company

douglas_knott 05-03-2011 11:39 AM

http://www.cotep.org/forum/picture.p...8&pictureid=54

Bass Ackwardz 05-03-2011 12:44 PM

Havent done any lead, but a nice light target load would be 6.7gr of Universal Clays under a 155gr Copper plated FP. I like it alot.

Bill

Hoss in IL 05-03-2011 11:16 PM

Bass, I thought the .40 S&W was the light target load :D

I haven't started reloads for my 10mm yet but I plan on working up to "hot and heavy". That's the whole idea, right?

Doug, where are you finding the Gold dots?

douglas_knott 05-03-2011 11:51 PM

Quote:

Originally Posted by Hoss in IL (Post 2840)
Bass, I thought the .40 S&W was the light target load :D

I haven't started reloads for my 10mm yet but I plan on working up to "hot and heavy". That's the whole idea, right?

Doug, where are you finding the Gold dots?

i picked up 100 from a friend in a trade. thats the only ones i got. :( they are hard to find.

Bass Ackwardz 05-06-2011 12:07 PM

Quote:

Originally Posted by Hoss in IL (Post 2840)
Bass, I thought the .40 S&W was the light target load :D

I haven't started reloads for my 10mm yet but I plan on working up to "hot and heavy". That's the whole idea, right?

Doug, where are you finding the Gold dots?


Yeah, I like the hot loads, but for just range plinking, I still love shooting the 10mm. So I always like to have a light load for it. Somebody said something about the 10mm that I thought was perfect for it. "The 10mm is like an old mucle car, pure horsepower..."


Bill

JeremyN 07-30-2011 09:06 PM

Anyone have other loads ? I have PowerPistol, 2400, WSF.. probably not ideal, but PP makes a good flash. I have the .40/10mm load book. maybe once I set my loading stuff back up I'll try some out.

Whats the useful life of 10mm brass on Mid-Heavy loads ?

douglas_knott 07-30-2011 11:09 PM

Power Pistol
9.5gr PP
9.7gr PP
10.5gr PP
135gr Nosler HP
all three loads worked great in my Razorback. 9.5gr is min and 10.6gr is max per my load manual for Power Pistol and 135gr hollow points.

Olympus 07-30-2011 11:14 PM

I just got some PP too for my 10mm. My newest Lyman book says max load for a 180gr JFP is 7.8. I loaded a few at 7.4 and plan on hitting the range tomorrow to try them out. First time shooting my CBOB.


Sent by Brown's Custom Grips using Tapatalk!

GLOCK10MM 07-31-2011 10:08 AM

Try Starline brass: 8.3 grains of VV N350 under a 165 grain remington golden sabre. It gives about 1250 fps out of my CBOB and about 1310 out of my G20 with the comped KKM barrel. These velocities are verified over a chronograph. They show no signs of pressure in my two firearms but your mileage may vary. Be carefull etc. On a side note this load produces almost no flash whatsoever. That was verified by night firing. Hope this helps :cool:


All times are GMT -4. The time now is 11:55 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.