Pigs powder lab
 

http://i1192.photobucket.com/albums/...ps9a1e0981.jpg


Little Dandy is handy...but the #7 rotor says it throws 4.5 grains of 231..actually throws 4.6-4.8. And the #8 rotor is supposed to throw 5 grains..actually throws 5.2-5.4. Time to engineer the #8 rotor. Anyone notice the high tech spent primer catcher? :D


http://i1192.photobucket.com/albums/...psd0704bd9.gif

Looks like the drippings pan on my BBQ. But it works doesn't it Mike? http://www.cotep.org/forum/images/icons/icon6.gif

Slick

Looking good Mikey!

yep, reload all day BBQ all night!

Very Nice, first lesson Reloading 101 keep gun powder away from thing that blow and give off Mositure, Oh I forgot you are a Marine, No Common Sense............................................. ......


Clyde

I turn the a/c off when I'm charging cases :p

Update. Bought some JB Weld Steelstick today. Going to degrease and rough up the cavity on the #8 rotor, apply some steelstick to the bottom, let it set up, then work it with a drill so it throws 5 grains consistently..or 4.9-50 then trickle as needed. I don't own a dremel :D But I do have steel rasp and file drill bits for my Dewalt..just gotta remember not to put it on hammer.......Also bought more insulation..90 today..welcome to spring in the Deep South funny

Same up here Mike. 90 the last couple days.

Dehumidifier went out in my garage reloading shop and I don't have AC in there.

Off to get a new dehumidifier. They seem to last a couple of years. Been through four or five by now.

Nice to see the bench is working!

Tom

Reckon a plug in dessicant deal like I use in my safe won't cut it in there, huh? :D