COTEP.org

COTEP.org (https://www.cotep.org/forum/index.php)
-   The Dremel Room (https://www.cotep.org/forum/forumdisplay.php?f=18)
-   -   Small scratches on CBOB! (https://www.cotep.org/forum/showthread.php?t=992)

DUBYA.R 12-26-2011 01:01 PM

Small scratches on CBOB!
 
I've noticed some small scratches on the left side of the slide, close to the muzzle, on my stainless CBOB!
(I discovered how the scratches got there, but I will save that for later)

Is there a way to remove these (light) scratches without changing the look or finish of my beloved CBOB?
I know I could send it out and have it done professionally, but I would rather do it myself.
I don't have an air compressor, but I do have a dremel, fine sandpaper, and that sort of stuff..along with some free time.
Any and all suggestions will be appreciated.

P.S. I no longer use my JAK-SLIDE holster when wearing bluejeans. My LEVI jeans have little rivet-type things (one on each side of the front pockets)
that will scratch the exposed slide of my gun, as I get-up, sit-down, and whatever, during the coarse of any given day. If you have this type of belt-slide-over the waist-minimalist holster..I bet you're checking out the pockets of your jeans, and the slides of your guns right now. Right?:eek:

SemperFi1977m 12-26-2011 02:10 PM

post a pic of the scratches....and please leave the Dremel in the drawer lol

Riverpigusmc 12-26-2011 03:20 PM

Quote:

Originally Posted by SemperFi1977m (Post 10944)
post a pic of the scratches....and please leave the Dremel in the drawer lol

^^
This. Good pistols+Dremel=Bad Juju

DUBYA.R 12-26-2011 03:35 PM

Quote:

Originally Posted by Riverpigusmc (Post 10953)
^^
This. Good pistols+Dremel=Bad Juju

Yes..I am well aware of the danger of the DREMEL!

Don't have time for pic right now..got to get cleaned up and take the Wife out to dinner. Will try to do and post pics later tonight.Clyde

skosh69 12-26-2011 06:45 PM

Here's what was passed onto to me to remove rust and scratches...

Go to the hardware store and get yourself some 0000 steel wool. Use that in combination with some good penetrating oil, ie.. Kroil, CorrosionX, etc...

Rub with the grain of the metal.

Good luck.

DUBYA.R 12-26-2011 08:03 PM

http://i772.photobucket.com/albums/y...ATCH1FORUM.jpgOK..Here is a pic. The scratches are not deep..it just bugs me that they are there on my CBOB!
http://i772.photobucket.com/albums/y...ATCH2FORUM.jpg
The way the light is hitting it makes it look like it's dented but it is not.

DUBYA.R 12-26-2011 08:09 PM

Quote:

Originally Posted by skosh69 (Post 10964)
Here's what was passed onto to me to remove rust and scratches...

Go to the hardware store and get yourself some 0000 steel wool. Use that in combination with some good penetrating oil, ie.. Kroil, CorrosionX, etc...

Rub with the grain of the metal.

Good luck.

Thank You,
Now, I read somewhere that you should not use steelwool on stainless steel.
Anyone know for sure?

Neener Neener 12-26-2011 08:11 PM

You might also try some Flitz......

DUBYA.R 12-26-2011 08:38 PM

This is the holster that allowed my jeans to get nasty w/my slide!
http://i772.photobucket.com/albums/y...11HOLSTER3.jpg
http://i772.photobucket.com/albums/y...11HOLSTER4.jpg

These pics were taken when I wore dress-pants and sport coats.

DUBYA.R 12-26-2011 08:50 PM

Quote:

Originally Posted by Neener Neener (Post 10972)
You might also try some Flitz......

That's a good idea.
I have some FLITZ and trying a little of it 1st, might just let me know how bad these scratches really are.
I'll post the results in the morning.:cool:


All times are GMT -4. The time now is 02:02 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.