So I go to the range to zero in my rifle. I used three bullseye targets. Once I thought I had it dialed in I put up a VTAC target. I didn't have access to a 100 yard range so I did at 50. I know that if I hold true at 50 and hits low about an inch then I'll be true at a 100. I wasn't looking to make this a tack driver. That's what my 700 is for.
So when I start taking at couple of shots to the head I noticed I was a little high, hence the three shots above the head. I came to realize I forgot to zero at the highest setting (7). Once I figured it out the hole you see on the bottom is three shots. I shot from the 50 prone with a bipod and a sand bag. It's on the money! The center is CQB I did at 10 yards. I held at the top of the square and hit center. At CQB distance you have to dial down to the lower setting (2).
The glass is very clear. Easy to acquire the reticle whether you're prone or in a CQB stance. I equate the scope to some of the high end ones I've used.
Verdict: I highly recommend the scope and so far very happy with it.
