Quote:
Originally Posted by Gatorade
I found the Taffin Tests load data but not that whol article. I will read that over. The only thing is they mostly use shortened .41 Mag brass to 1.160 but Starline is 1.155. May not be a big deal but something to consider.
|
unless you're going to run top end loads the small difference in brass size shouldn't really affect the pressure at all. and even if it did as long as they are shot from a Ruger or Smith chambered in 41Mag then you should be fine.
you probably already saw this but just in case.
http://www.shootingtimes.com/ammo/am...pecial_040711/