[Lane]

First, I appreciate all of the suggestions. I did some Googling before posting, and noticed that dang near every discussion on the other boards had a ton of flames and name calling. I knew that wouldn't happen here. Agree with do it yourself or not, no one told me how dumb I am. Thank you.

Second, I think the problem might be the sear spring. I disassembled the gun tonight and cleaned it, inspecting each piece carefully. The sear spring was mentioned as a potential suspect so I compared it to the original, and Viola! The middle leaf hardly had any bend in it at all. I re-bent it to match the original and reinstalled it. I'm heading to the range tomorrow - I'm going to take the original with me. If I still have issues, I'm going to swap out the spring.

I'll report back tomorrow. Thanks to my COTEP family for the suggestions and tips.

Sent from my A500 using Tapatalk