Quote:
Originally Posted by Caleb
Hum, I've never needed these to assemble an AR.  
You really don't need a vise either but, it definitely helps. |
Ever since I learned how to squeeze those pins with the vice grips I have stopped using the punch and hammer for all but a few steps in assembly. The vise would be necessary with a standard barrel nut assembly. 30+lbs of torque is hard to do without a vise. Also timing the gas tube sometime requires small but strong movements.
__________________
CBOB0746
NRA Life Member
Florida CWL Since 1992
Last edited by Gatorade; 06-06-2016 at 06:08 PM.
|