Quote:
Originally Posted by Grizzman
While you can mount the scope very low to the receiver, I'm not sure how easily it would be used in that config (unless you've got an especially malleable face). The standard tall sight height is due to the buffer tube being directly in-line with the barrel and bolt carrier.
Bullet impact will be low at some distances and high at others, so feel free to pick a zero distance and apply hold-over/under for others.
|
I should have clarified earlier. I posted above that I meant "low" meaning my placements are coming in low, relative to the bullseye, even though the reticle is dead on the bullseye. The scope is, actually, mounted high on a Burris P.E.P.R. mount, so that it clears (and is slightly forward of) the charging handle. No matter the adjustments I make to the scope, the placements are still just south of the bullseye.
I'm going to try some things Pig recommended (reset the scope to factory settings) and make sure the front support bag doesn't rest on the barrel.
Thanks!
