The RCBS die setup on the 550 is basically the same as it is on the Rock Chucker and other presses. While I screw the die into the Rock Chucker roughly 1/4 turn past shell plate contact, with the 550, I set it to just touch the shell plate.
Here's a link to the instructions in case you don't have them:
http://www.rcbs.com/RCBS/media/RCBSM...structions.pdf
__________________
COTEP #CBOB0353
Happiness is a warm, dirty gun.
Last edited by Grizzman; 09-06-2016 at 12:57 AM.
|