Quote:
Originally Posted by FfNJGTFO
OK, so find a metal rod (diameter of a paper clip over which the roll pin can fit). Put the roll pin over the rod, insert the rod and align, and then gently advance the roll pin.
The tube is definitely aligned to the upper. I will make sure I use the gun grease sparingly. And I'll use my roll pin holders to advance it to the point where I can start to tap it in.
Thanks much!
|
That should work, you just need it to help with alignment. Once you have the pin through one side, the other side will be aligned properly.
I’ve been wanting a 320 to just play around with and customize. Just never pulled the trigger on one.
Sent from my iPhone using Tapatalk