Update!
Well, the Nut that holds the Expander in place on top of the Die was backed off. This caused the Expander itself to back off inside the Die. This was puzzling as I always tighten the depth-nut with a wrench when I set the Die. This time it also got a shot of Red Loc-tite. BTW, this is a new set of RCBS Tungston-Carbide Dies.
__________________
Diligentia, Vis, Celeritas
COTEP#CBOB0428
NRA,GCA,OGCA, USAF,Msgt.(Ret.)
|