COTEP.org  

Go Back   COTEP.org > Main Category > Reloading Bench

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-22-2016, 09:01 PM
Gatorade's Avatar
Gatorade Gatorade is offline
COTEP Member
 
Join Date: May 2014
Posts: 2,615
Thanks: 802
Thanked 643 Times in 156 Posts
Default Black Tips!

I got hold of some Black Tip .308 from Mike (AFJuvat) I don't have a .308 but I do have a 300 Blackout 16" Rifle and an 8.5" SBR in Blackout as well. So I pulled some Fiocchi 150gr factory ammo I had on hand so I was working with virgin brass, loaded them up for the 168gr load using H110. The 150gr use a 16.2gr Max load so this one at 15.2 seemed right. I was able to use the Lee Factory Crimp Die but these bullets also have a crimp groove. I will try it out with bullets that don't to rule that out as my problem from the other thread.





Here is the load data. Went with the max load as I have loaded 150gr bullets with no problems with higher loads.



So now I have Green Tips, Orange Tips, Silver Tips and Black Tips. Taste the rainbow Zombies!
__________________
CBOB0746
NRA Life Member
Florida CWL Since 1992
Reply With Quote
The Following User Says Thank You to Gatorade For This Useful Post:
NAMVET72 (08-23-2016)
 

Thread Tools
Display Modes



All times are GMT -4. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.