My New Valor will never be the Same

[wildcatter]

Yep, the changes are a commin! My Valor V-BOB is on it's way to Mr. Severns. I have run close to 700 rounds thru it without a single issue, one 200 grain swc load, and 5 factory self defense loads, and 3 different hp bullet hand loads with different weights and nose profiles. Yep I decided it is a keeper!!!

So after I caried it daily for 3 months and shot everything I could find to reload and the top PP ammo thru it, I found it's weakness! well, maybe I didn't find any. But I like the looks of Dave's work and think it can shoot as good as any 1911 I currently own, with a little modification.

I didn't like the fact that when I picked it up at the gun shop, that I field stripped it without any tools right there on the counter. I was scared and didn't think it would shoot good with a Barrel Bushing I could take out and wiggle in the slide. I was wrong, it shot pretty good, but I think with a fitted bushing it will shoot better, and stay tighter for ever. Dave agreed he thought I could expect better accuracy with a fitted bushing. I told him a few mods I thought would make it a more comfortable carry gun and we agreed to get the ball rolling. After a month or two I got an ok to ship, he is ready for it.

So hear was what I wanted for comfort.
#1 the slide stop, and the thumb safety are way to wide for my preference for ccw (I carry inside the waist band, in a very thin leather clip holster), fine for combat shooting, but I don't feel necessary for a daily inside the belt carry gun. So Dave is going to take about 3 serrations off of each and put a downward bevel on the slide release for comfort against my side and tactical rounding of the edges.
#2 I think Dave's tactical dehorn is the most attractive and effective I have seen, so that's a go.
#3 Just for looks (and crown protection?) I am going to have him do his flush barrel to bushing crown job, makes the barrel look more massive.
#4 Then after taking the grip panel off the side that sets against my body and gets sweaty on those 100 degree or close days, it was covered with discolored finish stains, So YEP HARD HAT! It's either that or hard chrome, and I like the blued finish better on my pistols. I have herd nothing but good comments about the hard hat treatment. In time I will give my own opinion.

So to enhance accuracy, which is not needed for self defense, but I will pop a few woodchucks and the likes with, plus I shoot it and my other 1911's frequently at the range to 100 yards or more on gongs, Just one.\

#5 Is the gun smith fitted barrel bushing, This was the only thing I didn't like about the gun when I got it, and being a Les Baer owner and believing it was important to accuracy, I was worried. But after many different loads and reloads, it shoots surprisingly well. Dave does believe if I can see movement from side to side and feel it, we can make it shoot better with the front end locked up a little tighter. I can keep a clip inside of 1.5" at 25 yards now, if it will shoot even better it's money well spent!!

As far as reliability, it needed nothing, maybe a little less pattern of ejected cases, this thing does scatter em, but as far as feeding, this thing will eat anything!! I loaded my 200 grain swc three different OAL's and it run like a dream! So now the wait begins, I will miss it while it's gone, but I am sure this is a worthwhile inconvenience!!