Building Confidence

[Caleb]

That won’t work. That handguard is for the m4 style barrel but and “A” front sight. Stand by while I search for links on what barrel but you will need for that hand guard.


Sent from my iPhone using Tapatalk

Here is the barrel nut and delta ring you need.


https://www.opticsplanet.com/spikes-...arrel-nut.html





Here is the front sight/gas block you will need...


https://www.brownells.com/rifle-part...prod81261.aspx

[FfNJGTFO]

Originally Posted by Caleb

That won’t work. That handguard is for the m4 style barrel but and “A” front sight. Stand by while I search for links on what barrel but you will need for that hand guard.


Sent from my iPhone using Tapatalk

Here is the barrel nut and delta ring you need.


https://www.opticsplanet.com/spikes-...arrel-nut.html





Here is the front sight/gas block you will need...


https://www.brownells.com/rifle-part...prod81261.aspx

Are there any alternatives to the above gas block with "A" frame front sight? That happened to be the one thing I disliked about the original LE6920 OEM1 I had. It had the front sight (with gas block) built into the barrel assembly. It's why I wanted an OEM2 for this project but can't get one.... I don't like the fixed front sight because it blocks the scope.



If my only option is that A frame front sight, then I might have to re-consider the HG.


Thanks.

[Caleb]

Originally Posted by FfNJGTFO

Are there any alternatives to the above gas block with "A" frame front sight? That happened to be the one thing I disliked about the original LE6920 OEM1 I had. It had the front sight (with gas block) built into the barrel assembly. It's why I wanted an OEM2 for this project but can't get one.... I don't like the fixed front sight because it blocks the scope.



If my only option is that A frame front sight, then I might have to re-consider the HG.


Thanks.

Stand by, I think there is.

Edit: Nope, I was thinking of something else.

Looks like you will need to go with a free float hand guard.

Edit 2: It is possible to cut off the sight part of the block but you will lose the ability to run a front back up iron sight.


Sent from my iPhone using Tapatalk

[FfNJGTFO]

Originally Posted by Caleb

Edit 2: It is possible to cut off the sight part of the block but you will lose the ability to run a front back up iron sight.


Sent from my iPhone using Tapatalk

As it turns out, I was considering that for my original OEM1, but didn't feel confident enough to do it. I'll give it some strong consideration, this time, especially since I can always replace it with another one if needed.


I don't mind losing the "backup" sight portion of it. I'm strictly a "scope" man, m'self.....

[Horse'nround]

Originally Posted by FfNJGTFO

As it turns out, I was considering that for my original OEM1, but didn't feel confident enough to do it. I'll give it some strong consideration, this time, especially since I can always replace it with another one if needed.


I don't mind losing the "backup" sight portion of it. I'm strictly a "scope" man, m'self.....

So I'm wondering, if you don't want the iron sight why then the A2 brushhanger gas block? There are a bazillion different low profile gas blocks out there?

[Caleb]

Originally Posted by Horse'nround

So I'm wondering, if you don't want the iron sight why then the A2 brushhanger gas block? There are a bazillion different low profile gas blocks out there?

He wants to run the magpul hand guard.


Sent from my iPhone using Tapatalk