![]() |
|
Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
![]() |
![]() |
![]() |
|
#1
|
|||||
|
|||||
![]()
Problem solved.
You need one of these gas blocks or one similar.. https://www.opticsplanet.com/guntec-...-ALRHGB-GT750R ![]() ![]() You will need one of these as well.. ![]() These items along with the delta ring barrel nut and you will be able to run the Magpul hand guard. ![]() Sent from my iPhone using Tapatalk
__________________
**I have been Enlightened** |
#2
|
|||||
|
|||||
![]() Quote:
Wonderful! Thanks so much! ![]() |
#3
|
|||||
|
|||||
![]() Quote:
Will pick up my lowers tomorrow and the barrel and other parts are also due to arrive as well. |
#4
|
|||||
|
|||||
![]()
Update: The gas block arrived today.
![]() Good news - It fits well over the barrel. And having measured it, I will definitely need the mid-length HG. Bad - News - The shipment arrived with missing parts (allen key and the two set screws were missing). And, apparently, Optics Planet is not taking phone calls right now. Customer returns are also delayed. Better news - After speaking with both Optics Planet and the manufacturer GunTech, Both have indicated they are willing to supply the missing allen key and set screws. Could be a week to receive them. So, again, we'll see what happens. Last edited by FfNJGTFO; 10-01-2020 at 06:51 PM. |
![]() |
Thread Tools | |
Display Modes | |