|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
#14
05-31-2012, 12:53 PM
|
||||
|
||||
Trigger stop screw: It is correctly adjusted, however, we're replacing the trigger because it's some off-brand that is poorly fitted. There's entirely too much slop in it's travel (in all four directions, up and down and to the sides). I have 3 other 1911's which have trigger movement which is correct. The CBOB trigger movement isn't.
The reset is working correctly. No parts are ever tossed until spec'd out. Thanks for the measurement on the disconnector.
__________________
"What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others." NRA Member VietNam Vet. Retired Military: 1963-1967 U.S. Navy 1971-1987 MSgt, U.S. Air Force (TTK, IBBA, SACmasized, Plank Owner USSPACECOM). CBOB 0650 Dan Wesson CBOB 08 build. 
|
| Thread Tools | |
| Display Modes | |
Threaded Mode