|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
05-23-2011, 12:55 PM
|
|||||
|
|||||
 , what powder will work best depends on your barrel-length and what you intend the round to do. In mid-range loads, I've had alot of luck with Unique(A little dirty but accurate powder) and AA-7. Unless you have a six-inch barrel I would stay away from slower-burning powders like 2400, 296, H110, AA-9 and such.
__________________
Diligentia, Vis, Celeritas COTEP#CBOB0428 NRA,GCA,OGCA, USAF,Msgt.(Ret.) 
|
|
#2
05-23-2011, 01:16 PM
|
|||||
|
|||||
|
Dave my Smith Model 19 has a six inch barrel........
__________________
CBOB:0002 1905 Savage 380, 1978, 1980 DW Pistol Pacs, Severns Custom 1985 Springer 1911A1, 09 DW Marksman, S&W Model 19-6, GSG 1911 22LR. , S&W Model 29-2
|
|
#3
05-24-2011, 05:59 PM
|
|||||
|
|||||
|
13 grains of 2400, WSP primer,158Hardcast SWC. OAL 1.65" Does about 1325fps in my and my friends' 6" 357s.
also,6.5 grains of unique renders about the same velocity.
__________________
Diligentia, Vis, Celeritas COTEP#CBOB0428 NRA,GCA,OGCA, USAF,Msgt.(Ret.)
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode