COTEP code

[Mghwk]

Hi Folks,
I wanted to let people know that the Cotep code is valid for 20% off and shipping during the holidays is only a penny. Thanks for all the support.

Mark

ps. I wanted to also let you know that the 1911 version fits the Kahr single stack 45 cal pistols perfectly. The Springfield XDS, Sig P220, and pretty much any single stack 9mm/40cal are in stock, built on the 1911 MagHolder shell. The Sig 938 has been popular, although the post office lost one on its way to a customer recently.

[Mghwk]

The cotep code has been used a time or two, and I thank the folks for their business. I've had questions about vertical MagHolders from both LEOs and competitive shooters, and have thus introduced a double vertical MagHolder system. I will put more on the website soon, but wanted to at least point you to shop.magholder.com for a photo. It came out better than I hoped. The spacing between mags is about 1/4" greater than my blackhawk, which makes access to the #2 mag a bit more sure if for some reason you need it. It fits very close to the body and is more comfortable than any vertical mag pouch I've ever seen.

Finally, the #1 MagHolder can be removed from the leather carrier and worn horizontally if you don't need 2 that day.

More to follow, but check it out now As usual, 30 days to try it satisfaction guaranteed and get in on this once in a life time opportunity to get 2 MagHolders for the price of 2 MagHolders

Thanks Again,
Mark

[Mghwk]

I haven't looked at this thread in a while. We have gone through a couple generations of improvements to the MagHolders and have models to fit most everything that isn't a double stack 45 or 10mm. Those are coming soon.

New materials, improved geometry, and new models. The "Cotep" code is still working for 20% off. Give a horizontal MagHolder a try. If you have one of the early models, there is a link to upgrade for the cost of postage, too.

Shop.magholder.com

Thanks again!
Mark

[sdmc530]

Originally Posted by Mghwk

I haven't looked at this thread in a while. We have gone through a couple generations of improvements to the MagHolders and have models to fit most everything that isn't a double stack 45 or 10mm. Those are coming soon.

New materials, improved geometry, and new models. The "Cotep" code is still working for 20% off. Give a horizontal MagHolder a try. If you have one of the early models, there is a link to upgrade for the cost of postage, too.

Shop.magholder.com

Thanks again!
Mark

Got one...still love it for my shortie....good stuff