New Springfield RO 9mm

[AutoMag]

Originally Posted by flphotog

Well, I'd post a picture if I could figure out how to do that on here.

I do quite a bit of work on the trigger actually. I like to get it down to 3.5 to 4 lbs with no creep. Stock, mine is about 6.5 lbs with quite a bit of creep. The main thing I do to get there is a bit of stoning on the hammer hook as well as the sear using an Ed Brown sear jig. Actually more than that depending on what I find when I get inside.

As for the pic is there any way to do that without using a link to somewhere else?

Sounds good on the trigger work.

As far as posting pictures I personally use Photobucket but I think you can post without using a picture host but I am not sure how to do it, sorry!!

[flphotog]

OK, let's try this: http://imgur.com/a/XCEF0

The one on the bottom is my RO .45, the top is the new RO 9mm. Externally I've replaced the MSH and front sight on the .45, will be doing this on the 9mm as well. Just like the arched MSH better and really don't like the ILS so I kill two birds with one stone so to speak.

[TLE2]

The images aren't publicly available.

[flphotog]

Originally Posted by TLE2

The images aren't publicly available.

OK, working now, sorry for all the trouble.

Here it is again: http://imgur.com/a/XCEF0
Thanks

[skosh69]

Congrats. ..nice pistola.

[Sheepdog]

Sweet!