COTEP.org  

Go Back   COTEP.org > Main Category > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 07-31-2014, 10:06 AM
Caleb's Avatar
Caleb Caleb is offline
COTEP Member
 
Join Date: Sep 2013
Location: Earth
Posts: 11,471
Thanks: 4,198
Thanked 1,137 Times in 254 Posts
Default

I never jumped on the frog train......too many steps to apply. I prefer RandCLP, works great. Joe's oldschool way is proven, cheap, and will be around for years. I use this technique on my rifles.

Good luck bro, hope it works out for you.....if not, there are plenty of other products out there.
__________________
**I have been Enlightened**
Reply With Quote
  #2  
Old 07-31-2014, 10:18 AM
Shadow's Avatar
Shadow Shadow is offline
COTEP Member
 
Join Date: Jun 2014
Location: South Florida
Posts: 152
Thanks: 9
Thanked 70 Times in 12 Posts
Default

Quote:
Originally Posted by IamCaleb View Post
I never jumped on the frog train......too many steps to apply. I prefer RandCLP, works great. Joe's oldschool way is proven, cheap, and will be around for years. I use this technique on my rifles.

Good luck bro, hope it works out for you.....if not, there are plenty of other products out there.
What steps? warming it up? Just have to do that first couple of times. Thereafter cleaning is much easier since nothing sticks.
__________________
COTEP #0749

I changed my car horn to gun shot sounds. People move out of the way much faster now
Reply With Quote
  #3  
Old 07-31-2014, 12:27 PM
Caleb's Avatar
Caleb Caleb is offline
COTEP Member
 
Join Date: Sep 2013
Location: Earth
Posts: 11,471
Thanks: 4,198
Thanked 1,137 Times in 254 Posts
Default

Quote:
Originally Posted by Shadow View Post
What steps? warming it up? Just have to do that first couple of times. Thereafter cleaning is much easier since nothing sticks.

Yep...that. Two or three drops of RandCLP and I'm done. Clean up is easy as well, usually just a wioe down with the swabs.
__________________
**I have been Enlightened**
Reply With Quote
  #4  
Old 07-31-2014, 01:14 PM
Shadow's Avatar
Shadow Shadow is offline
COTEP Member
 
Join Date: Jun 2014
Location: South Florida
Posts: 152
Thanks: 9
Thanked 70 Times in 12 Posts
Default

I just spoke to the folks at FrogLube. They explained if the gun is not prepped the first time to remove all trace of petroleum products it can become sticky/gummy. That is why they recommend degreasing with alcohol first. If it is clean down to the bare metal, correct application of FrogLube will NOT result in any stickiness. It makes sense that there could be a reaction to mixing both types of products.

To prove to myself there is no problem, I just took out of the safe my old S&W Mod-36. After having been used with solvents/oil for 30 years, it was prepped and cleaned with FrogLube almost two years ago. It has not been touched, lubed or fired in that time. Not a bit of stickiness whatsoever, nor on any of the other guns that have been "frogged" over the past two years.

Lastly, I pointed out a section on the website instructions that are somewhat vague about prepping for the first time. It will be brought to the attention of the powers that be and will be corrected. I will follow for these changes.
__________________
COTEP #0749

I changed my car horn to gun shot sounds. People move out of the way much faster now
Reply With Quote
  #5  
Old 07-31-2014, 01:23 PM
milkmanjoe's Avatar
milkmanjoe milkmanjoe is offline
COTEP Member
 
Join Date: Sep 2013
Location: Fl or SC, wherever my wife banishes me to
Posts: 4,227
Thanks: 736
Thanked 383 Times in 88 Posts
Default

Quote:
Originally Posted by Shadow View Post
I just spoke to the folks at FrogLube. They explained if the gun is not prepped the first time to remove all trace of petroleum products it can become sticky/gummy. That is why they recommend degreasing with alcohol first. If it is clean down to the bare metal, correct application of FrogLube will NOT result in any stickiness. It makes sense that there could be a reaction to mixing both types of products.

To prove to myself there is no problem, I just took out of the safe my old S&W Mod-36. After having been used with solvents/oil for 30 years, it was prepped and cleaned with FrogLube almost two years ago. It has not been touched, lubed or fired in that time. Not a bit of stickiness whatsoever, nor on any of the other guns that have been "frogged" over the past two years.

Lastly, I pointed out a section on the website instructions that are somewhat vague about prepping for the first time. It will be brought to the attention of the powers that be and will be corrected. I will follow for these changes.

They still need to change the name or it ain't going on my guns.
__________________
CBOB0716

"The most basic right that we have emanates from our Creator and it is that unalienable right to life. We stand firmly on the principle that from conception until the last breath is drawn, life is sacred.”

Political Correctness is a doctrine, recently fostered by a delusional, illogical minority and promoted by a sick mainstream media, which holds forth the proposition that it is entirely possible to pick up a piece of shit by the clean end!
Reply With Quote
  #6  
Old 07-31-2014, 01:47 PM
Shadow's Avatar
Shadow Shadow is offline
COTEP Member
 
Join Date: Jun 2014
Location: South Florida
Posts: 152
Thanks: 9
Thanked 70 Times in 12 Posts
Default

Quote:
Originally Posted by milkmanjoe View Post
They still need to change the name or it ain't going on my guns.
Hey Joe....
__________________
COTEP #0749

I changed my car horn to gun shot sounds. People move out of the way much faster now
Reply With Quote
  #7  
Old 07-31-2014, 02:20 PM
milkmanjoe's Avatar
milkmanjoe milkmanjoe is offline
COTEP Member
 
Join Date: Sep 2013
Location: Fl or SC, wherever my wife banishes me to
Posts: 4,227
Thanks: 736
Thanked 383 Times in 88 Posts
Default

Quote:
Originally Posted by Shadow View Post
Hey Joe....
__________________
CBOB0716

"The most basic right that we have emanates from our Creator and it is that unalienable right to life. We stand firmly on the principle that from conception until the last breath is drawn, life is sacred.”

Political Correctness is a doctrine, recently fostered by a delusional, illogical minority and promoted by a sick mainstream media, which holds forth the proposition that it is entirely possible to pick up a piece of shit by the clean end!
Reply With Quote
  #8  
Old 07-31-2014, 02:40 PM
MPDC's Avatar
MPDC MPDC is offline
COTEP Member
 
Join Date: Jun 2014
Location: SW Florida
Posts: 524
Blog Entries: 1
Thanks: 118
Thanked 162 Times in 35 Posts
Default

Quote:
Originally Posted by Shadow View Post
Hey Joe....

The "BRONX CHEER" !
__________________
God is great, beer is good, people are crazy!
USMC 66-69 Sgt E-5, "Wing wiper "
COTEP #744
Reply With Quote
  #9  
Old 07-31-2014, 12:24 PM
AdamG247 (Navy-Ret) AdamG247 (Navy-Ret) is offline
COTEP Member
 
Join Date: Jul 2014
Location: Bradenton Florida
Posts: 112
Thanks: 15
Thanked 18 Times in 5 Posts
Default

Used it and found it to be more work than its worth. Just my humble opinion. It did start to get sticky and was slowing the action down enough to indicate to me sooner or later the action will freeze up. Was a tad bit too close to a nightmare to remove completely.

Went back to my regular lube I get from Wilson and never looked back. Something about the product having to be put on so precisely and if you mess up the application your gun may not go bang is really the reason I backed away. Why make it complicated? Just keep your guns wet all the time and you will have no problems. Except perhaps some oil stains on your clothes....

KISS principle always prevails..
__________________
Regards,

AdamG247 (Oath Keeper-Not on our watch)
""I, do solemnly swear that I will support and
defend the Constitution of the United States
against all enemies, foreign and domestic;
that I will bear true faith and allegiance to the same,
so help me God!"
Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.