New DW Valor has significant peening on slide -- How normal is this?

[titanse05]

This is a non-issue. Changing the slide stop won't make it go away. This wear is typical of all 1911s with stainless steel slides.

The removal of high spots that the DW rep is referring to is any high spot that is created in the area can be removed by stoning or light filing.

[Rick McC.]

Originally Posted by titanse05

This is a non-issue. Changing the slide stop won't make it go away. This wear is typical of all 1911s with stainless steel slides.

The removal of high spots that the DW rep is referring to is any high spot that is created in the area can be removed by stoning or light filing.

Uh; I don't think so.

Three of my 1911's have stainless slides, and none have any peening of the SS notches. The other four 1911's don't either.

The stainless slide ones are two Colts and one Kimber (I know).

I don't own any DW's though. Is there something different about the design of their slide stops that causes the peening?

[DrHenley]

Originally Posted by Rick McC.

Is there something different about the design of their slide stops that causes the peening?

May be...

From top to bottom: Colt, DW, Sig - all stainless steel. Not a hint of peening on the Colt and Sig slides. Granted the DW has a higher round count, but the Colt and Sig have both been through IDPA matches.

The DW has a carbon steel slide stop, and the others have stainless slide stops.

[brownie]

Originally Posted by Rick McC.

Uh; I don't think so.

Three of my 1911's have stainless slides, and none have any peening of the SS notches. The other four 1911's don't either.

The stainless slide ones are two Colts and one Kimber (I know).

I don't own any DW's though. Is there something different about the design of their slide stops that causes the peening?

This ^, I'd be concerned about it [ not function wise but that's NOT normal on s/s 1911 slides ]. I've never had a s/s slide do that in several makers model 1911's. I'd not accept it as "normal" no matter what DW said.

[Sheepdog]

Nope, not right. Call Keith at Dan Wesson. Send him photos. Something is not working right. Take a look at the other side of the slide stop than what is showing in the photo. The place where it is causing the peening, it should have a slight angle to it.