|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
05-19-2011, 12:58 PM
|
|||||
|
|||||
For those interested, here is a comparison pic of my Standard Model and AutoMag's Target Model. The difference in these are that his sights are mounted to the stationary barrel assembly, and mine are mounted to the moving slide....his design gives tighter groups according to the AA website.
__________________
COTEP #0443 USMC #0311 "Do your duty in all things. You cannot do more, you should never wish to do less." ~Robert E Lee “The hottest places in hell are reserved for those who in times of great moral crises maintain their neutrality.” ~Dante Alighieri 
|
|
#2
05-19-2011, 01:10 PM
|
|||||
|
|||||
|
That's really nice,
 . I'll be PMing you for some more info on that set up. I'd like to shoot squirrels and coons with my 1911's but not .45 
__________________
COTEP CBOB390 Government name- Terry
|
|
#3
05-19-2011, 01:44 PM
|
||||
|
||||
|
That looks nice. I've also been somewhat considering a 22 lr conversion.
Eagerly awaiting the range report. 
__________________
COTEP #CBOB0353 Happiness is a warm, dirty gun.
|
|
#5
05-19-2011, 05:39 PM
|
|||||
|
|||||
|
like usual....the WalMart closest to me was out of what I came for. No CCI MiniMags and only 1 box of Remington Golden Bullet. Since I only have 100 rounds, I only ran 3 mags through it from the kitchen out the back door....I'll use the rest up when the rain lets up and I can hang some targets. Threw a tin can aout about 25 feet and consistantly hit it after I found I was hitting high....I need to adjust the rear sight.
First 2 mags I fired at a steady pace, and with no jams on the Remington ammo, I rapid fired the last mag.....still no jams. It isnt locking back on the last round with either mag I have, but I suspect it may be having to do with my RIA and not the conversion lol. I have a gap between my mags (22 and 45) and the notch in the bottom of the frame, i.e. they hang down....I think its a common issue with Rocks. I may try one of those EGW mag releases that brings your magazine up tighter.
__________________
COTEP #0443 USMC #0311 "Do your duty in all things. You cannot do more, you should never wish to do less." ~Robert E Lee “The hottest places in hell are reserved for those who in times of great moral crises maintain their neutrality.” ~Dante Alighieri Last edited by SemperFi1977m; 05-19-2011 at 05:43 PM.
|
|
#7
05-19-2011, 06:54 PM
|
|||||
|
|||||
|
Quote:
It does mention that some manufacturer's plunger springs and/or slide stops can cause issues with slide locking back.....so I will tinker with that
__________________
COTEP #0443 USMC #0311 "Do your duty in all things. You cannot do more, you should never wish to do less." ~Robert E Lee “The hottest places in hell are reserved for those who in times of great moral crises maintain their neutrality.” ~Dante Alighieri
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode