![]() |
|
Register | Forums | Blogs | Today's Posts | Search | Donate |
![]() |
![]() |
![]() |
|
#3
|
||||
|
||||
![]()
I've actually read several posts by guys that tumble their brass again after they're fully loaded rounds.
I've never done that myself, but I'd think that cleaning primed brass in a vibratory tumbler would be much less hazardous than that. In your situation, that's what I'd probably do. The only downside to it I see would be if the tumbling media plugged the flash hole in the brass. I see it all the time in mine, but the pin that pushes the primer out gets rid of it as well. In your instance of already primed brass; that won't be happening.
__________________
"Sights are for the unenlightened” |