COTEP.org  

Go Back   COTEP.org > Main Category > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2012, 09:31 PM
oopie oopie is offline
Founding Member
COTEP Member
 
Join Date: Jan 2012
Location: Las Vegas
Posts: 12
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Thanks for the suggestions..... I've been using 5.3 gr at an OAL of 1.260. I'm thinking I should back it down a notch......I really need to get a chronograph.
__________________
CBOB590
DW CCO, Colt 100 yr. ANVIII, Colt Rail Gun, Colt Series 70, Fusion Commander, Springfield Mil-Spec, Glock 23, S&W model 642,
Reply With Quote
  #2  
Old 02-12-2012, 11:05 PM
Dave Waits's Avatar
Dave Waits Dave Waits is offline
Founding COTEP Member who is watching over us from above with God at a giant shooting range in heaven
COTEP Member
 
Join Date: Apr 2011
Location: Loveland, Ohio
Posts: 928
Thanks: 4
Thanked 229 Times in 59 Posts
Default

My load has an ave.velocity of 835FPS at ten feet from the muzzle through my Prochrono.
__________________
Diligentia, Vis, Celeritas
COTEP#CBOB0428
NRA,GCA,OGCA, USAF,Msgt.(Ret.)
Reply With Quote
  #3  
Old 02-25-2012, 01:39 AM
oopie oopie is offline
Founding Member
COTEP Member
 
Join Date: Jan 2012
Location: Las Vegas
Posts: 12
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Dave Waits View Post
My load has an ave.velocity of 835FPS at ten feet from the muzzle through my Prochrono.
Thanks for the info....I ordered a ProChrono yesterday and will see if I get close to the same reading as you.
__________________
CBOB590
DW CCO, Colt 100 yr. ANVIII, Colt Rail Gun, Colt Series 70, Fusion Commander, Springfield Mil-Spec, Glock 23, S&W model 642,
Reply With Quote
  #4  
Old 03-05-2012, 09:31 PM
oopie oopie is offline
Founding Member
COTEP Member
 
Join Date: Jan 2012
Location: Las Vegas
Posts: 12
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Dave Waits View Post
My load has an ave.velocity of 835FPS at ten feet from the muzzle through my Prochrono.
I'm getting an average of 775 fps using 5.2 gr..OAL 1.268. I was hoping for more like what you were getting at 835 fps. Do you think by moving up to 5.3 gr would get me there?...I'm pretty new to this and not sure how much velocity would be gained by .1gr......
__________________
CBOB590
DW CCO, Colt 100 yr. ANVIII, Colt Rail Gun, Colt Series 70, Fusion Commander, Springfield Mil-Spec, Glock 23, S&W model 642,
Reply With Quote
  #5  
Old 03-06-2012, 11:56 AM
Dave Waits's Avatar
Dave Waits Dave Waits is offline
Founding COTEP Member who is watching over us from above with God at a giant shooting range in heaven
COTEP Member
 
Join Date: Apr 2011
Location: Loveland, Ohio
Posts: 928
Thanks: 4
Thanked 229 Times in 59 Posts
Default

Hmmm. reset your length to take it down another .003 and check diameter of your crimp at the mouth. I run .471. Lotta different factors involved here. Also. velocities run faster than Published in my barrel, it's a little fast. However, the books all show 5.3 grains running around 854fps or so. I'm running a tenth of a grain less and getting 835fps, you should be seeing more than 775fps.

How far away are you setting up the Chrono? Are you shooting through the upper third?
__________________
Diligentia, Vis, Celeritas
COTEP#CBOB0428
NRA,GCA,OGCA, USAF,Msgt.(Ret.)
Reply With Quote
  #6  
Old 03-06-2012, 04:04 PM
oopie oopie is offline
Founding Member
COTEP Member
 
Join Date: Jan 2012
Location: Las Vegas
Posts: 12
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Dave Waits View Post
Hmmm. reset your length to take it down another .003 and check diameter of your crimp at the mouth. I run .471. Lotta different factors involved here. Also. velocities run faster than Published in my barrel, it's a little fast. However, the books all show 5.3 grains running around 854fps or so. I'm running a tenth of a grain less and getting 835fps, you should be seeing more than 775fps.

How far away are you setting up the Chrono? Are you shooting through the upper third?
I will try seating it a little deeper. I would say I was about 8 to 10 feet from the chrono. I was shooting right through the middle, should I be shooting through the upper third?....I did not know that. Thanks for helping. Also, would the barrel length of the gun affect velocity?....I am using a commander size 1911.
__________________
CBOB590
DW CCO, Colt 100 yr. ANVIII, Colt Rail Gun, Colt Series 70, Fusion Commander, Springfield Mil-Spec, Glock 23, S&W model 642,

Last edited by oopie; 03-06-2012 at 04:07 PM.
Reply With Quote
Reply




All times are GMT -4. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.