Clean .45 acp powder suggestion

ChefJ Clean .45 acp powder... 02-19-2012, 07:55 PM

AutoMag I have always used Winchester... 02-19-2012, 07:56 PM

ChefJ I tried to get some 231 today... 02-19-2012, 08:42 PM

sdmc530 I am by no means a expert... 02-19-2012, 08:48 PM

GoldenVolt I also use 231, it works well... 02-19-2012, 09:08 PM

Dave Waits I use HP-38( Like Volt said,... 02-19-2012, 09:55 PM

ChefJ I'll see if I can't get my... 02-20-2012, 05:37 PM

MPrimo Hodgdon Clays powder works... 02-20-2012, 06:44 PM

ChefJ I thought I had read about... 02-20-2012, 09:43 PM

titanse05 Another pleased W231 user... 02-20-2012, 09:54 PM

BadOscar I used to use W231 because... 02-20-2012, 10:36 PM

CalWhit33 Dumb question alert! If HP... 02-21-2012, 06:14 AM

Dave Waits Cal, HP-38 is made by Hodgdon... 02-21-2012, 05:56 PM

ChefJ That does it, I'm going... 02-21-2012, 06:01 PM

DaFadda Hodgdon Universal Clays. 5.6... 02-21-2012, 06:24 PM

svandamme VihtaVuori N340 is pretty... 02-22-2012, 02:00 AM

Dave Waits AA-7 is a little slow for the... 02-22-2012, 01:54 PM

svandamme well i didn't like it for the... 02-22-2012, 02:05 PM

ChefJ I tried an 11 grain charge of... 02-22-2012, 06:45 PM

Dave Waits Chef, what I meant was the... 02-22-2012, 08:17 PM

ChefJ I was just remarking to... 02-22-2012, 09:58 PM

Dave Bob 4.9 grains of WST 200 grain... 02-23-2012, 10:41 AM

JohnnyMoses I've never thought 6 gr of... 03-10-2012, 11:14 PM

#12

02-21-2012, 06:14 AM

CalWhit33

Founding Member

COTEP Member

Join Date: Apr 2011

Location: Texas

Posts: 139

Blog Entries: 1

Thanks: 3

Thanked 0 Times in 0 Posts

Dumb question alert!

If HP 38 is same thing as w321 is all load data interchangeable between the two? And who makes this HP 38?

I am currently using bullseye and like that I can load 45&38, with w321 or the hp38 can I load 45, 38 & 9mm?

__________________
Calvin
Cotep #464

Just living life and appreciating every day