Brand New CBOB. 2012 Model. Hammer Follow while firing!!!

[dw1911]

Originally Posted by MPrimo

You can give it a quickie function test at home. Cycle the action. Pull the trigger and hold it in then cycle the action again with the trigger back. The hammer should stay cocked after the second cycle. When you get to the range ... load no more than 2 rounds to start just in case. Oh ... I speak from experience!!! And yes, nail polish will work.

Good luck with it!

Did the function test, it passed fine. But.... It would pass that before.
The range will be the only real test. That screw was off a bit! I'm sure I turned it in about 1 and 1/2 turns. I also tested it as Keith said and using two hands SLOWLY let the hammer come down wile holding the trigger in, no catches on the sear or hammer at all. Think it will be ok.