COTEP.org  

Go Back   COTEP.org > Main Category > The Dremel Room

Reply
 
Thread Tools Display Modes
  #1  
Old 12-19-2012, 03:16 PM
navman navman is offline
Founding Member
COTEP Member
 
Join Date: Feb 2012
Posts: 53
Thanks: 0
Thanked 6 Times in 1 Post
Default

Really, no guess'....

Alright then. I use silver solder to add just a few thousandths under the blade, then mill or file to fit. The cold blue in the following pics is to see how much (if any) of the silver solder remains, the goal being as little visible as possible (especially if the gun is to be blued like this one, blueing doesn't like silver solder). Not sure how clear it is in the pics, but there is no visible solder to affect the blueing.

The blend job is almost complete. What appears to be a slight gap between the frame rails and the bottom of the slide is actually just a minute bevel on the back edge of the slide rails.

The rear sight is a 10-8 U notch and the front is an SDM Gold Bead, now fit with zero gap under either.

The rear of the slide has been blended with the frame, extractor and ejector, still needs to be finished...enjoy.

No, that is not the thumb safety that will end up on the build, waiting for a NOVAK (if not I have an EGW that will get reprofiled.)





Last edited by navman; 12-19-2012 at 03:19 PM.
Reply With Quote
  #2  
Old 12-19-2012, 03:34 PM
AutoMag's Avatar
AutoMag AutoMag is offline
Founding Member
COTEP Member
 
Join Date: Apr 2011
Posts: 4,697
Thanks: 154
Thanked 263 Times in 74 Posts
Default

It is coming along really nice navman!!!
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!!


COTEP # CBOB0152
Reply With Quote
  #3  
Old 12-20-2012, 10:29 AM
Boats's Avatar
Boats Boats is offline
COTEP Member
 
Join Date: Sep 2012
Location: SE Virginia
Posts: 1,255
Thanks: 31
Thanked 86 Times in 39 Posts
Default

My son Sean and I went over to Navman's house last night for some bullsh***ing, gun talk, scotch sipping and to take a look at my pistol.

Damn it looks good. Really starting to take shape. The only part we're waiting on is the thumb safety, but it looks like we'll go ahead with something we have in hand as the one we specified is still back ordered.

Otherwise, Navman is working on the action, and reliability next.

We also were thinking about whether bluing was the right choice, or perhaps IonBond Diamond Black. We took a look at an ion bonded slide and it really looks good. ion binding is also quite a bit more durable than bluing.

So I'm thinking about that and will be talking to the ionbond people today.

Overall, I'm really happy with the progress.

The scotch was tasty, too!

__________________
If you love wealth more than liberty, the tranquility of servitude better than the animating contest of freedom, depart from us in peace. We ask not your counsel nor your arms. Crouch down and lick the hand that feeds you. May your chains rest lightly upon you and may posterity forget that you were our countrymen.
-- Samuel Adams
COTEP CBOB0676
KO4ENQ
Reply With Quote
  #4  
Old 12-20-2012, 11:54 AM
Snipersnest's Avatar
Snipersnest Snipersnest is offline
Founding Member
COTEP Member
 
Join Date: Nov 2011
Location: Massachusetts
Posts: 2,628
Thanks: 32
Thanked 547 Times in 129 Posts
Default

Quote:
Originally Posted by Boats View Post
The scotch was tasty, too!
It always tastes better when it's free!
__________________
CBOBO555
If You Run, You'll Only Die Tired
U.S.M.C. Combat Vet 64-68
Kentucky Colonel
Retired Motor Officer
Reply With Quote
  #5  
Old 12-20-2012, 12:15 PM
Boats's Avatar
Boats Boats is offline
COTEP Member
 
Join Date: Sep 2012
Location: SE Virginia
Posts: 1,255
Thanks: 31
Thanked 86 Times in 39 Posts
Default

Quote:
Originally Posted by Snipersnest View Post
It always tastes better when it's free!
It wasn't free... I bought it and brought it over!

__________________
If you love wealth more than liberty, the tranquility of servitude better than the animating contest of freedom, depart from us in peace. We ask not your counsel nor your arms. Crouch down and lick the hand that feeds you. May your chains rest lightly upon you and may posterity forget that you were our countrymen.
-- Samuel Adams
COTEP CBOB0676
KO4ENQ
Reply With Quote
  #6  
Old 12-24-2012, 07:20 AM
navman navman is offline
Founding Member
COTEP Member
 
Join Date: Feb 2012
Posts: 53
Thanks: 0
Thanked 6 Times in 1 Post
Default

Speaking of which picked up a bottle of Glenmorangie Sherry Cask 12yo...

And for the holidays, an update on the pistol:

Rear of slide final blended and serrated at 50lpi to match rear sight, extracor and ejector serrated to match. Dehorned and carry beveled all sharp edges. Blended in the high cut front strap. Finished and bordered the checkering on thne front strap.
Reply With Quote
  #7  
Old 12-24-2012, 08:20 AM
Boats's Avatar
Boats Boats is offline
COTEP Member
 
Join Date: Sep 2012
Location: SE Virginia
Posts: 1,255
Thanks: 31
Thanked 86 Times in 39 Posts
Default

Quote:
Originally Posted by navman View Post
Speaking of which picked up a bottle of Glenmorangie Sherry Cask 12yo...

And for the holidays, an update on the pistol:

Rear of slide final blended and serrated at 50lpi to match rear sight, extracor and ejector serrated to match. Dehorned and carry beveled all sharp edges. Blended in the high cut front strap. Finished and bordered the checkering on thne front strap.
Wow, are you already home from the Folks?

That Glenmorangie is what Glenfiddich copied the bottle I brought over from, I think. Couldn't find the Glenmorangie when I was shopping for a sipping bottle for us.

You didn't drink it all already, did you?

I think Sean and I need to come over after Christmas to check out the progress on the pistol

Hate to let it go for two months, but pretty soon it goes to get ion bonded.

__________________
If you love wealth more than liberty, the tranquility of servitude better than the animating contest of freedom, depart from us in peace. We ask not your counsel nor your arms. Crouch down and lick the hand that feeds you. May your chains rest lightly upon you and may posterity forget that you were our countrymen.
-- Samuel Adams
COTEP CBOB0676
KO4ENQ
Reply With Quote
  #8  
Old 12-24-2012, 12:44 PM
NAMVET72's Avatar
NAMVET72 NAMVET72 is offline
Founding Member
Super Moderator
 
Join Date: Apr 2011
Location: Pa
Posts: 5,864
Thanks: 1,399
Thanked 1,478 Times in 295 Posts
Default

Quote:
Originally Posted by navman View Post
Speaking of which picked up a bottle of Glenmorangie Sherry Cask 12yo...

And for the holidays, an update on the pistol:

Rear of slide final blended and serrated at 50lpi to match rear sight, extracor and ejector serrated to match. Dehorned and carry beveled all sharp edges. Blended in the high cut front strap. Finished and bordered the checkering on thne front strap.
Never happened without Pics........................... Hint Hint Hint



__________________
CBOB:0002
1905 Savage 380, 1978, 1980 DW Pistol Pacs, Severns Custom 1985 Springer 1911A1, 09 DW Marksman, S&W Model 19-6, GSG 1911 22LR. , S&W Model 29-2
Reply With Quote
Reply




All times are GMT -4. The time now is 03:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.