|
Register | Forums | Blogs | Today's Posts | Search | Donate |
#1
|
||||
|
||||
RIA TCM midsize testing reloads
So I took out the TCM today which has been seeing a LOT of action lately and I've been shooting the heck out of it recently, unfortunately I've been mostly shooting steel so there aren't really any fancy pictures of targets since they are mostly either "hits" or "misses"
Anyway, I'm not a long distance guy and typically only practice at defensive distances around the 10yd mark but wanted to shoot some steel so I thought I would fire some at 15, 25, and 50 yards and found it to be quite enjoyable with this particular weapon due to its speed and not having to compensate for bullet drop at these distances for hitting 6" plates anyway.. I was testing some of my new TCM reloads and also some brass that I made from 223 brass this morning. Everything worked great and I'll share more soon! ImageUploadedByTapatalk1355259944.646768.jpg Last edited by KeystoneWeaponBK; 12-11-2012 at 04:16 PM. |
The Following 2 Users Say Thank You to KeystoneWeaponBK For This Useful Post: | ||
AutoMag (12-11-2012), Old Draftsman (12-11-2012) |
#2
|
|||||
|
|||||
Great post Bill!!
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152 |
#4
|
||||
|
||||
Thanks guys, the main reason I went to the range yesterday was to test TCM reloads and a GSG1911-22 That I did a trigger job on for a friend. I will start a thread over in the reloading area for the TCM if anyone is into that sort of thing... Here are a few pics of the particular pistol I was firing:
And lastly, a link to further info on it on my terribly under construction webspace: http://www.keystoneweapon.com/Keysto...Commander.html |
#5
|
|||||
|
|||||
Keep them coming Bill!!!
We need some good posts on the forum. has a thread on the GSG1911-22, check it out.
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152 |
#6
|
|||||
|
|||||
i only wished they had designed the TCM as a single stack.
__________________
Ron #CBOB0604 Proud Member: "Team Ranstad" |
#7
|
||||
|
||||
I know there is some reason that they didn't release a SS version but i'm not sure what the technical reason is, I hope that someday that will become a reality as well, the double has grown on me quite a bit but I still would love to have one in a single stack configuration!
|