FMJ and LRN down the same barrel

[Gatorade]

Jim, my load is 228gr wheel weights, quenched in a bucket of water, mixed head stamp brass with Remington Large Pistol primer. 5.0 grains of Bullseye. I use liquid alox tumble lube and size to .451.

I was having some issues with my first few batches of reloads because the crimp die was crimping before the bullet was set all the way and it was building up lead around the top rim of the case. With the build up the bullets wouldn't go fully into battery. I learned about the plunk test with the barrel. I still have a couple rounds that were a little tight but the Lee Alox is sticky stuff sometimes.

When I tried using just the bullets as they came out the bullet mold (Lee 452-228-1R) were too big and budged the brass.

Tomorrow is range day so I will update then.